The clear definition of the borders of the garden allows you to effectively organize the internal space of the site. Therefore, dackets try to use various borders. But, as a rule, they try to do with infringement means, so it is worth knowing how to make a border with your own hands. This will help to fulfill the task without attracting additional finances.
Content
The importance of the construction
The need to install a curb on the garden is also due to the possibility to increase the fertile layer. Additional high side is well holding a fenced soil or compost and mulch. Thanks to the weeding and irrigation, the ground will not spread out, in addition, it will disappear the need to rent a plot every year.
With the help of such a structure you can get rid of weeds in the aisle. Suffice it only after the installation of curbs to fill the remaining space with mulch of bark or sawdust.
Borders can serve as a reliable basis for the carcass of the greenhouse. If you build small greenhouses, then the arc is more convenient to mount on a solid surface. This will give the rigidity of the overall design, ease of operation.
As for the aesthetic side of the question, the exactly decorated areas always look carefully. The clean space of the parties gives well-groomed and the finished type of territory.
Execution options
In the manufacture of a border for the beds, you can use traditional materials, such as:
- wood. This is considered not the cost option, because the farm can always find a edged and unedged board, a bar, rails, a porch. Of these, they make a box without a bottom or separate sections of the fence with pegs for simple installation. It is important to treat all the elements of the design by antiseptics and means against the beetles. Then the manufactured wooden fence will serve for a long time even in contact with damp soil;
- metal. In the process of erection of the border, it is necessary to apply galvanized - it is an expensive, but practical option. Steel fence can be made independently or buy finished products. Of the advantages worth noting the convenience of operation - mobile partitions easily change their location. It is necessary to take into account the thermal conductivity of the material - on hot days, the metal heats the soil strongly, sometimes the plants get burns;
- stone. From it can be pulled out a low fence or used as an addition to another material. For example, walls made of metal grid, which are filled with a stone - it turns out a strong, reliable wall. It can withstand significant loads from the soil;
- plastic is used mainly when designing rounded or curvilinear beds. Of the advantages worth noting the durability of this choice - because the material is not exposed to the action of sunlight and moisture. And for the installation of the design, it is enough to stick special pins in the ground;
- slate is increasingly used not as intended. As a rule, his gardeners are chosen if there are sheet residues after construction work. The material helps to preserve the shape of the bed, and when the paint coating it will serve as a decor.
Own construction
The stores offer a lot of ready-made options, however, you can consider an inexpensive border for the beds, which will be different in durability and original design. It is worth considering the decisions in order. 
Natural solution
If we consider the wood materials, the construction of a peg or wint will be an interesting solution. To build the first fence, you will need to install a frame with a further trim tree. Initially, the racks are mounted, they associate them with horizontal rails. It will only be left to attach pegs in the manner like. The length of the elements is selected depending on the height of the desired design.
A popular option is a braided fence, but it is more designed for the decor. Such a border will decorate any plot, but it is short-lived. Erected construction is enough for only 2-3 years. To extend the life of the wicker border, it is necessary to use the maximum number of vertical supports. And polyethylene, stretched between rods and soil contributes to the preservation of the material. 
Hardware
For a long time, the border issue will solve the metal structure. The easiest option is the strip of galvanized steel, it can be simply stick to the ground. Also in stores offer metal sections to build a low fence, it will not be difficult to establish such a design.
Bordeur of stone
Natural stone looks original as a side, it can be spread out of a flat slate or ordinary cobblestones. In the process of manufacturing such a fence will have to work, because all elements have different shape and size. The stones are selected according to similar parameters, dump and fasten with a cement mortar. Through time, such a curb under his weight settles in the ground, so it is important to carefully select elements.
To obtain a more accurate appearance, the side is used brick. You can dump the design of the existing material residues, subsequently such a fence color or whites. And some gardeners specifically buy a new brick, spread quite high walls. Such a solid border is characterized by a spectacular view and durability.
Alternatively, it is possible to offer independently making a border tile. We will need plastic forms of the same size and cement-sandy solution. The finished mixture is filled with forms, after a day, we take the tile. It should fly in a dark place without drafts about a month for a durability. It is important to water water periodically water. Working with finished tiles is easy, it is placed as a brick.
Plastic fences
The plastic produces special garden tapes that are quickly installed in the required place. They are not very heated during the heat, respectively, the plants will not suffer from the overaffect of heat. The appearance of a plastic border for a bed can resemble a metal or stone, while the selected color of the coating will complement the overall picture of the site. For installation, it is buried shallow into the ground. With a high length, it is fixed with knockers installed alternately outside and inside the bed.
Slate for Borchk
To arrange a border from slate, it must be mounted around the perimeter so that the upper part is at the same level. For this, the sheet is divided into strips of the same width. Next, it is buried on the outlined lines. To give decorative properties, the side is covered with paint.
Solutions from priest materials
As a material for the side, you can use bottles - plastic or glass. In the first case, the same capacity is selected, filled with sand for stability. Then they pull the shallow trench, the bottles are inserted into it and the ground is sealing. This design is convenient for the arrangement of a garden or a parisader of any form. Instead of plastic containers, glass bottles are also used - a spectacular and reliable border is ensured even without attaching additional finances. To organize a backlight in transparent containers, you can lay LEDs - the site will not lose its attractiveness even at night.
Circling options are very much, for example, it is worth viewing the following video:
