Today, sectional gates are by no means a sign of solidity or wealth. They are installed almost on any sites where the house is combined with a garage room. It should be borne in mind that sectional doors significantly simplify the life of avid motorists who often enjoy the garage.

Many garages with sectional gates argue that one of the main advantages is manifested in the winter. At this time, a large amount of precipitation is formed, which may be simply to blow the garage from the outside world. In the case of the usual gate, you have to take a shovel and rake snowy dawn. Sectional gates allow you to get rid of this unpleasant procedure, simply by pressing the button located on the remote, after which the car can enter inside.

There are actually a lot of such situations related to the practicality of the use of sectional gates, and you can tell for a long time. Some situations we analyze in this material, as well as try to disassemble the main stages related to the installation of the sectional gate. It should be noted in advance that even newcomers can cope with this case, who were previously not engaged in anything like.

Main features of section gates

It must be said that most often the sectional doors can be found in industry. This is a practical solution for the reason that the opening of the gate can be easily and simply in automatic mode. Moreover, such a gate is more convenient to use for regular transportation of goods.

It should also be borne in mind that in the presence of a gorgeous private house, it is easy to easily install ordinary swing gates. This is already a frankly outdated decision, which in the modern world has long gone to the past.

In addition, in case of problems, section gates can easily be opened manually, while the spring mechanism allows you to do this with minimal effort.

Also, as already mentioned, the installation of such a gate can be made with their own hands. And in the safety plan, sectional gates are several times more reliable than classic.

Advantages and Disadvantages of Sectional Gate

It is necessary to note all the main positive and negative sides of the sectional gate, so that every person can make a conscious choice.

The advantages of the sectional doors are as follows:

• Security. We just mentioned that the attackers have almost no chance to get into the garage, because sectional gates have protection against springs and cables. This is especially important if the garage is not near a private house, but somewhere among the general garage sector. However, it is not necessary to think that section gates will easily be removed from any rogues, since today the resourcefulness of the criminals remains only to envy.
• Practicality. As mentioned at the very beginning of this article, the sectional gate is incredible to exploitly simply under any conditions. Particularly useful will be such a gate in the event that we have too limited space. In such a situation, the swollen gates are definitely not suitable, but the sectional doors are an impeccable option. Also, do not forget that in this case the gate can open automatically, which saves time significantly.
• Reliability and durability. Practice shows that modern sectional gates can work for many years without repair. And all for the reason that the system itself is incredibly simple, and any problems that occur during operation can be easily corrected. Even with active operation, section gates will serve without regular repairs at least ten years.
• Protective panels. The front part of the gate consisting of panels is distinguished by excellent quality. Most often, this surface is galvanized, which makes it inaccessible to the effects of corrosion and other influences. With this scenario, the gate will look attractive for many years. Also, do not forget that the sectional doors are easy enough to replace if it is necessary.

The main disadvantage that relates to a sectional gate is based on a sufficiently high probability of hacking. However, this concerns not all the gates. Modern manufacturers have long taken into account this drawback. But for hacking some modifications of the sectional gates, there is enough special tools that often use crooks. This question is still before buying to discuss with the manufacturer. Perhaps the assortment has a gate with additional protection methods. Of course, it should be borne in mind that most often sectional doors are located in a private area where you can equip all the necessary security tools.

It is possible to sum up and say that the virtues of the sectional gate is much more than flaws, and it is worth paying attention to it first. And do not forget that other advantages and disadvantages can appear depending on the location of the garage, as well as its dimensions.

Preliminary manipulations before installing sectional gates

At the very beginning, you need to analyze the actions related to the purchase of sectional gates. Most often, manufacturers offer ready-made sets that will easily gather anyone. Of course, together with all the necessary details, the relevant instructions are also supplied, on the basis of which will be installed. It is best to make a choice in favor of proven manufacturers of this product, since it is in this case that it is possible to count on the loyal attitude of specialists in case of some difficulties. And the difficulties will definitely be, it is only unknown what way they will be allowed - with the help of detailed instructions or after consulting directly with the manufacturer.

If we appeal directly to the manufacturer, we need to have dimensions of the future gate. All necessary measurements should be performed, primarily related to the size of the opening for the sectional product. This is a very responsible stage, as any errors may question the possibility of setting the gate. Such products are expensive, and you need to remember.

If the manufacturer offers exceptionally standard size of the gate that you do not suit us, you should look for another company.

In the process of installing the gate, we need to have the following tools:

• building level;
• perforator;
• screwdriver;
• roulette;
• mounting tool;
• drills (with special nozzles).

As for the additional fasteners and other parts required for the installation process, then often all the necessary components are present in the set from the manufacturer of the sectional gate.

In addition, it is necessary to conduct preparatory work that concern the walls and other surfaces. Any facing present around the opening must be removed. If the walls have significant irregularities or flaws, it is necessary to see everything with a metal frame. Any surfaces of the surfaces are unacceptable, so you need to arrange a construction level and check each element enshrined on the surface. You can find special metal gaskets, which are ideal for opening irregularities.

Floor alignment is another serious moment. If at least the small irregularities of the floor are present, then the gap will be seen under the omitted gate. In this case, there are also security issues. It is best to align the floor by creating a high-quality concrete screed, after which it is possible to install metal elements on the surface that will never wear out.

Instead of metal surfaces, you can equip wooden. This is not so fundamentally. The most important thing is the durability of the sectional gate installed. However, in the event that, for example, the surface of the opening come into disrepair, the gate will have to disassemble to repair. But many people install sectional gates not for a garage, but for a small warehouse, which is not so often used. As for the extension of the Sectional Gate service, you can create doors already indoors, which will allow you to quickly get the garage, while without leaving the room. Accordingly, sectional gates will be operated less frequently.

Sectional Gate Setup

It is worth noting in advance that the sectional doors need to be installed in accordance with the instructions that the manufacturer provides. The company engaged in the release of the gate must compile a full-fledged manual in which even the smallest (and at first glance is insignificant), the detail of the installation process will be indicated. However, today manufacturers offer consumers approximately similar system of sectional gates.

The most basic is the use of those materials and tools that are specified in the instructions, as any errors can lead to the inoperability of the gate.

In the general, the process of installing the gate consists of the following steps:

• At the very beginning, the installation of horizontal and vertical guides. It is for these elements that traffic will occur while turning out the gate. With the help of special loops there is a connection of the guides. All these elements must be installed exactly, it is impossible to make the presence of at least the slightest cracks.
• At this stage, we will need to establish the main control mechanisms, as well as all other elements that relate to the handles, locks and other parts for opening the gate. In this case, we have quite a lot of different elements that are of great importance. The main thing is not to get around the party at least one of the details, otherwise there may be difficulties related to operation.
• Now it's time for installing balanced springs. This is the most important component on which the adjustment of the cables depends - they must be well strained, and it is in such a state most of the use of the gate.
• Almost at the very end, installation of the stroke limits, as well as automatic systems, occurs. The latter can include control buttons, photocells and other details, allowing to significantly simplify the operation of the sectional gate.
• Well, in completion, it is necessary to install the sections of the gate. Most often, this stage of work passes very quickly. Here you just need to position all sectional elements in the right order, but you need to do everything possible so as not to damage the sections (if they are metallic). Otherwise, corrosion may form on the surface of the gate.

Immediately after the installation process you need to test the system. Obviously, for various reasons, the gate may not work, especially if we are talking about automatic systems. If everything is done correctly, then the mechanical gate will always work canceled. You also need to check the smoothness of the stroke, as some flaws during installation can manifest itself in this situation. If smoothness is broken, guides and mechanisms will quickly wear out, and will also be rapidly unusable.

Once again, it should be noted that when installing the gate you need to use only original parts that are distinguished by high quality. Those items that have previously used somewhere can cause troubleshooting a sectional gate.

Well, in conclusion, I would like to note the fact that in recent years the hosts are increasingly installing sectional doors personally. When you spend this process with your own hands, confidence that everything is done for many years is responsible for the work performed. Specialists also request too large money for the events that occupy a few hours of time. However, in this case, a flexible warranty is provided, at any time you can call specialists who can quickly eliminate all the problems available.