Garage sectional gates are a unique design that ensures a high degree of protection of private buildings and industrial facilities. Their reliability, durability and ease of operation are distinguished from similar products. They occupy quite a bit of space and have an affordable cost.
Content
Sectional Garage Gate: Features
Sectional garage doors, reviews about which are mainly positive, equipped with a special web from sections, movably fixed with a loop. When they open the section, the section is smoothly moving along the guides located on the sides of the opening and in turn go up, located under the ceiling.
Such a design can be used in almost any room:
- on a hundred and warehouses;
- car wash and shopping centers;
- in offices, public and private garages.
Sectional garage doors whose sizes may vary, have a long service life, namely until 20 years. The resource is up to 25 thousand openings. As for wear, it is mainly susceptible to moving elements - springs, side hinges with rollers. When replacing the details of the details, the gate can continue to function a long time.
Depending on the wishes of the customer, the garage sectional gates can be equipped with doors, windows and electric drive having remote control. In addition, you can install a special access restriction function, after which it will be available only from the inside.
Advantages of buying sectional garage gates
- A wide selection of colors, textures, configurations and patterns.
- Saving space.
- High sound and thermal insulation.
- Easy unlock in the absence of electricity.
- Silent functioning.
- Acceptable cost.
- Corrosion resistance.
- Ease of use.
- Effective access restriction.
- Easy installation.
- Security and practicality.
- Resistance to hacking.
- The possibility of installation on buildings made from any building materials, etc.
Garage lifting section gates: design
The automatic sectional gate is made of sandwich panels, which are made of 2 steel sheets with zinc spraying. The space between them is filled with polyurethane foam. On both sides, the gate is coated with a polyester, providing protection against mechanical impacts and adverse climatic conditions. Over the edges of the finished product, rubber gaskets are mounted, reliably holding heat and prevent moisture penetration. In contrast to the rolled types of the gate, section can be installed in heated rooms and not be afraid of the formation of ice crust.
Garage section gates, the cost of which depends on additional equipment, occupy a minimum of space and open strictly vertically. If there is any object, a person or an animal on the way of the product, the system automatically turns off and stops the movement. In addition, all the gates are equipped with special double springs and cables that exclude the possibility of spontaneous lowering the "doors".
Types and features of the use of sectional garage gates
All automatic sectional doors can be divided into several groups:
1. According to the intensity of use:
- gate automatic domestic use;
- automatic industrial gates.
2. By type and appointment:
- garage automatic;
- sectional garage;
- garage lifting and rotary doors;
- automatic roll type;
- other types of automatic industrial gates: swing, "harmonica", retractable, sectional circular;
- street entrance automatic gates;
- gate automatic swing, etc.
In addition to the above automatic gates, there are other types of special-purpose products.
Thus, based on the design, the garage sectional gates can be equipped with a combined and ceiling electric drive with the possibility of remote control and a built-in unique security system that instantly turns off the power if an obstacle is on the path. The signal from the console starts the drive, which pulls behind the top edge of the gate, and the sections, bending at an angle, enter the ceiling.
The mass of the finished product is usually compensated by a special torsion mechanism located above the opening, which allows you to easily open the gate, even without the help of an electrical drive. And in case of an emergency light disconnection, automatic unlocking system occurs.
Sectional automatic garage doors are installed on the inside of the room, which makes it possible to use them in the openings of any complexity and shape, as well as maintain their size unchanged.
Modern price policy of manufacturers for sectional automatic gates makes it possible to purchase such structures by car owners even with an average intraction. A wide variety of modifications provides the possibility of individual selection of products depending on the wishes. For example, today the gate is made with a complex horizontal molding-corrugation and unusual viper molding.
Garage sectional doors Photo:
Garage sectional gates Video:
