Peat looks for giving with their own hands

October 19. Useful advice, Repair and construction work Views 630. Comments To the recording of peat looks for giving with their own hands No

The cottage is a place where every person can relax, join the nature and for a while to remove from the everybody of the big city. To achieve maximum comfort, you need to build a premises for corrupting natural needs. Our article will be discussed how to make a look at the giving from peat.

Peat looks for giving. Principle of operation

From an ecological point of view, the room made from peat is just like a look. In a regular booth, a toilet bowl is mounted, which consists of two elements: filler (upper part) and tanks (lower part). You should also get a dispenser with which the peat consumption is adjusted.

The principle of operation consists in the following - when rotating the handle on the toilet, the peat covers and "flushes" the sewage. For waste disposal of waste. A year later, waste can be used as an organic fertilizer.

1

Requirements for peat beyatuette for giving

Make a look at the dacha will not be much difficulty. The main condition is the use of a special peat variety. The usual material is definitely not suitable, since it does not contain microorganisms that process waste into fertilizer. A special peat is characterized by the ability to quickly absorb liquid.

As for the material of manufacture, it is better to purchase a design of frost-resistant plastic. Such a dry lad is suitable for both the street and for the indoor room.

Immediately should carefully check the dispenser for performance. Covers of the filler and tanks must have maximum tightness. Otherwise, protection against unpleasant odor and flies is not guaranteed.

When carrying out such work, how to make a look at the dacha with your own hands, pay attention to the size of the drive. This tank must comply with family needs. If the family consists of 3-4 people, then the minimum drive must be 100 liters.

2

Peat looks for giving - the advantages of construction

The advantages of the peat library include:

  • inappropriateness of communications: water supply, electricity and sewerage;
  • simplicity of installation work;
  • the ability to dismantle and transfer the design to another place;
  • compact dimensions;
  • the lack of expenditure on the operation of the room.

The only nuance in such a process, how to make a look itself, is to create high-quality ventilation and drainage systems. The height of the ventilation pipe should be 3.5-4 m. For more efficient odor removal, you can use the fan.

Peat looks for giving. Designing

At the initial stage, drawings of the peat library are drawn up. The location of the structure is determined. The best option is behind the facade of the building, 5-7 meters from it. Naturally, the room can be built elsewhere. After all, it does not require creating a cesspool, which provides for the subsequent pumping of uncleanness.

3

It is possible to make a look at any economic building (or at home). In this case, ventilation and drainage system are pre-created.

Bar and Phaneur should be purchased, since in most cases it is used for the manufacture of peat-beyouts with their own hands. The seat is made from the bar, and the entire design is shed from plywood. Before installing all wooden elements:

  • cleared and polished by sandpaper;
  • processed by antiseptic and moisture resistant.

Assembling peat liberty

The main task in the implementation of installation works is a device of a solid and functional design.

4

The process of creating a peat library for giving with their own hands includes the following sequential steps:

  • 45 * 45 cm plywood is applied bucket, the circuits of which are powered by a pencil;
  • on the intended line of the electric bison is cut out the hole;
  • 20 mm thick boards are made of a thickness of 20 mm, the length of which corresponds to plywood sizes;
  • a board is nailed to the resulting box, which acts as a reference element;
  • loops are attached to the supporting board, on which the plywood sheet is located with a hole;
  • the inner side of the box is equipped with legs that protrude 5-6 cm;
  • in the middle of the box is placed a container for waste;
  • under the cover for the toilet, holes are drilled;
  • with the help of self-tapping screws, the cover is connected to the plywood base;
  • installation of the upper part of the toilet;
  • wooden elements are covered with varnish or paint.

To improve waste recycling in peat, add sawdust. It is possible even in a ratio of 1 to 1. The minimum layer must be within 5 cm. In this way, each portion of waste is proper. This procedure makes compost better and completely eliminates the sharp smell.

5

When filling out the accumulative capacity, it should be removed and put on a bunch where the natural preparation of compost compost is carried out. The tank is necessarily clean and dried. For this reason, it is recommended to purchase another container. While one tank dries, you can use the second.

It can be done so that the liquid from the dry lads flow into the street. For this purpose, the bottom of the cumulative reservoir is covered with a grid, and on the surface of the Earth is a removal with the help of a trench. The undoubted advantage of this design is the uncertainty of waste deposit and the manufacture of the finished compost.

The main element of the peat liberal with a gravity is a large chamber that has several compartments. Compartments are mounted under a specific slope and consist of several download levels:

  • the first - for the receipt of uncleanness;
  • the second is for mixing with peat;
  • third - for waste recycling;
  • fourth - to unload the finished compost.

Video about how to make a look like your own hands:

Related records

Add a comment

Your e-mail will not be published. Mandatory fields are marked *

« »