Sewage zoom - the most frequent problem is not only private houses, but also apartments. The main causes of sewage pipes are in incorrect or not careful use of sewage. Many "negligent" residents often confuse sewer pipes with garbage chute, throwing even large waste into the toilet. Over time, a layer of fat, dirt and various waste is growing on the walls of the pipes, which reduces their permeability. If only bad plums becomes the greatest problem for private homeowners in this case, then for the owners of apartments, the riser can cause a real catastrophe. In order for this not happened, the sewer pipes must be constantly cleaning. The process of cleaning the sewer system in an apartment or private house is practically no different. About how to make sewage cleaning with your own hands, we will tell you more about further.

Sewage zoom: What are the options for cleaning the sewage with their own hands exist

To eliminate the break, use several methods with their own hands:

• Mechanical cleaning. It is mechanically removing the cause of the blockage. This method is very effective for complex mechanical blockages, with which chemicals will not be able to cope. For mechanical cleaning, ventuls or steel cables are used.
• Chemical cleaning. For chemical cleaning, active substances are used (alkali). When connected with water, they are able to dissolve fats, hair, fluff and other trash, which is the cause of the formation of traffic jams. The use of chemical means is a simpler method than mechanical cleaning, however, it is not able to cope with serious mechanical stamps.

• Hydrodynamic cleaning. Based on using a jet under pressure to remove traffic. For this, special machines are used (pumps) that create a powerful jet.
• Cleaning by homemade means. Mostly for this use solutions of soda, vinegar and boiling water.

All options for eliminating the problem of the break in the bath do not require special knowledge and skills, and such actions can be performed independently.

Using a cable for cleaning sewage to clean your own hands

The cable for mechanical sewage cleaning should be in each farm. This simple tool is quite effective for cleaning even complex plugs. In the emergency, it is possible to wait for an emergency brigade for a long time, and with the help of a cable, you can easily cope with the problem.

The cable is a steel rope, from 3 to 5 meters long. At one end (working), the cable "diverges" to individual strands, forming the ERS. Recently, special removable nozzles are used at the working end of the cleaning cable:

• Auger - used to remove from the walls of the sewage pipe of fat sediments.
• Hook - designed to engage tissue traffic jams and pulling out their outwards.
• Scraper - used to remove precipitation from the walls of pipes of large diameter.
• Harpoon - breaks through the plug and engages it for pulling out of the pipe.
• Also used different peaks, sliding knife, spring nozzles.

At the other end of the cable, a handle is attributed. It is needed to rotate the cable in order for its use to be more efficient.

For cleaning plastic pipes, cables with rubberized braid are used. It does not scratch the inner surface of the pipe.

Cleaning sewage using a cable is carried out as follows:

1. First of all, it is necessary to inspect the work end of the cable. The nozzle must be well fixed on the cable. Otherwise, it can fly and stay in the pipe, only aggravating the situation.
2. Next, you must remove the lid of the audit window, if any. If it is not, the cable is entered directly into the hole in the pipe, disconnecting the siphon siphon or bath.
3. A cable is introduced into the hole in the pipe, until resistance is felt.
4. During the introduction, it must be constantly rotated clockwise. It is better to do it together, one person pushes the cable, the other rotates the handle.
5. As soon as the resistance is felt, there are progressive movements back and forth until the resistance disappears.
6. After the plug is broken, the cable must be removed from the pipe and be sure to wipe the rag.

Cleaning selection features

Plastic pipes have become particularly popular in the construction of private or apartment buildings. They have a number of indisputable advantages over cast-iron models. For their cleaning, almost all methods are excellent.

Perfectly helps chemical cleaning of plastic pipes. In contrast to cast iron, plastic is not affected by the active formulations.

Chemical purification of pipes is carried out as follows:

• A remedy for cleaning pipes is poured into the drain hole. As a rule, this uses a crystalline caustic soda.
• After that, it is necessary to pour 250-300 ml of hot water into the hole. The reaction of powder and water flows very violently, so it is better to be away from it.
• 30-40 minutes after use, the sewer must be washed with hot water.

"Tyret Gel" to eliminate sewage breakups with their own hands is one of the most effective chemicals. It perfectly copes with fat deposits, food residues, hair and tissues, toilet paper residues that are most often littered with plastic works.

Clean plastic sewage with a cable. However, only the cables in the plastic braid should be used to not damage the walls of the pipe.

Hydrodynamic method of cleaning sewage with their own hands

Hydrodynamic purification is carried out using special pumps and hydrodynamic machines, which create a high pressure stream, clearing blockages. Efficient use of the hydrodynamic method remains for pipes with a diameter of 50 to 300 mm.

This purification is carried out as follows:

• The pump is installed in front of the sewage system, the water supply hose is connected to the hussac of the mixer or the water crane.
• The outlet hose with a nozzle is started in the sewer hole.
• Next, the pump is launched, and the system is washed for several minutes.
• The hydrodynamic method can be ineffective when eliminating complex blockages with their own hands. Even high pressure may not pierce the rigid tissue (for example, if the floor rag fell into the toilet)). In this case, the water, pushing the plug, can go back. In this case, it is better to use a cable.

Equipment for cleaning sewage with their own hands

Basically, cables are used to clean the sewage. This item can be made independently.

For this you need:

• Cable steel spring or rope with a diameter of 8 mm.
• Tube steel internal diameter 9 mm.
• Steel bolt M8.

Procedure for installation work:

• The first thing is cut off a small piece of pipe, one end of which the end of the cable is inserted and pressed.
• Next, the head is cut off and the side of the cut. It is inserted into the same pipe and pressed. Various nozzles will be cooked on this thread, which are similar to 8 mm threads.
• From the reverse side of the cable, a zigzag handle is installed to make it convenient to rotate the cable.

Prevention of blocks of pipes

In order not to be cleaned the cleaning of pipes, simple and rapid preventive measures for cleaning, which will be addressed further:

• Once in 10-14 days should be flushed with hot water. Well, if this water is running. But if you have no boiler in the apartment, you can independently warm the water in a large container.
• It is extremely recommended to throw in the drainage of washing and in the toilet the various food and household waste, the remains of food, as it serves as the priority cause of congestion.
• Use the fat separator regularly. They can be installed directly under the sink. In such devices, there are most often two types of filters capable of retaining particles of fat and dirt.
• Conduct the prophylactic cleaning of the sewage zero using soda and vinegar. To do this, 6 tbsp in the bucket with hot water. vinegar and 4 tbsp. vinegar.

The fastest folk methods for cleaning the sewage sewage pipes

Purification of sewage sewage pipes: Vanutuz

There are several fastest and simple ways to clean pipes from blockages, which are die by even conventional housewives. Tell about it in more detail. So, what kind of ways are:

• Vanutuz.
• Stream hot water.
• Chemicals intended for cleaning blockage.

Principle of cleaning of pipes with Vanuza:

• With the help of a rubber band (rings), fixed on a wooden handle, the drain opening is complete.
• Further, when you press the rubber band on the drain, an intense pressure flow is formed, thanks to which the garbage accumulated in the pipe moves down the pipeline.
• When the gum is removed from the drain hole, the blockage under the influence of the same pressure flow, rises up, falling into the visibility zone, where it can be easily removed independently (get it with hands, remove with a cloth).

Cleaning pipe sewage pipes with "Crow"

On the market today there are many powder facilities that can cope with pipe clouds. One of the most effective is considered to be "Mole." His composition is a caustic nat. The procedure for cleaning the sewage tooling "Mole" with their own hands the following:

• Powder fall asleep into the drain hole.
• Leave the preparation in the pipe for 2 hours.
• Then the pipeline is washed under the influence of a large flux of hot water.

Cleaning of sewage sewage pipes: hot water stream

The flux of hot water can affect a small dirt plug in the pipe. For this, the following folk recipes are used:

• Heat water in high tank. Then poured it under pressure in the pipeline. Next, they give up the above manipulation with vanatuz.
• Halfing a glass of drinking soda and fall asleep it into the drain hole. They give it way to stand soda on the walls of the pipe for 10-15 minutes. Then the hot water is poured under pressure.
• Fall asleep in the drain 7 tbsp. Soda and slightly acetic acid. After a chemical reaction occurs in the pipe, the drain is washed with hot water.

Cleaning sewage with your own hands: video