Maintenance of home appliances mainly requires independent intervention, it saves finance and temporary costs. As for the accumulative water heaters, it is necessary to merge water from the tank, but many consumers simply did not come across this issue. Sometimes it does not tolerate the delay, so you need to get acquainted with the design of the device for readiness for any situations.
Content
- Possible situations for draining
- Principle of operation of the device
- Methods of complete removal of water from the tank yandex_partner_id \u003d 22445; yandex_site_bg_color \u003d 'fffff'; yandex_ad_format \u003d 'direct'; yandex_font_size \u003d 1.0; yandex_direct_type \u003d 'vertical'; yandex_direct_border_type \u003d 'ad'; yandex_direct_limit \u003d 1; yandex_direct_title_font_size \u003d 2; yandex_direct_links_underline \u003d true; yandex_direct_bg_color \u003d 'fffff'; yandex_direct_border_color \u003d 'fffff'; yandex_direct_title_color \u003d '0C77EC'; yandex_direct_url_color \u003d '000000'; yandex_direct_text_color \u003d '000000'; yandex_direct_hover_color \u003d 'CC0000'; yandex_direct_favicon \u003d true; yandex_no_sitelinks \u003d true; document.write (''); (adsbygoogle \u003d window.adsbygoogle || []). Push (());
- Examples of the right plum
Possible situations for draining
There are two main reasons for draining water from the water heater:
- equipment breakdown;
- irregular use.
The first reason is a necessity, because in front of any repair you need to free the tank from the liquid. Basically, after purchasing and installing such equipment, a guarantee contract and service is concluded, then it is enough to call masters to determine the causes and troubleshooting.
In the second case, the water heater plum is worth thinking only after reading the instructions from the manufacturer, mainly such measures are not welcome due to the acceleration of the process of oxidation of the elements of the mechanism. Due to changes in the medium, the tank can start corrosive, to obstacle the process, it is enough to simply shock water or run a heater to work. The only thing you need is to monitor the ambient temperature. There should be at least 5 ° C in the room, because the frozen water can damage the elements of the equipment.
Principle of operation of the device 
In order to understand how to merge water from the water heater, you need to know the device and the principle of its work. The boiler is usually enameled or stainless steel tank. Two tubes, anximent and a tang are connected to it. The tank has a heat insulating layer of the insulation, the body of the equipment is already on top. For automation of the device, there is a thermostat.
It would seem that nothing is simpler than to drain the water from the water heater, but if you cover the power to the tank and open the crane, the liquid will be released only to a certain level. Stroke water that goes above the hot water tube level, and for the complete empty of the tank, it is necessary to ensure air access inward.
Impractical models of devices
It is necessary to take into account that in small models of the boilers there is a device of the upper water supply, then the drain holes are simply not provided. This is due to observance of safety, in such a situation you need to merge water from the water heater only after removal. We'll have to completely turn the equipment, so it is better to immediately choose more convenient models.
Prepared Mounting Measures for Establishment
Especially often to drain the water to dackets, because the device they use seasonally. Therefore, it is better to take care of the convenience of such a function. For the right drain of water it is worth putting tees with cranes at the entrance and the outlet of the liquid of their boiler.
Methods of complete removal of water from the tank 
There are four ways to organize a drain:
- in the existence of a tee and crane;
- in the presence of a trigger;
- using the check valve;
- when moving valve.
1. The first option is carried out when the valve is divided and the pipe with a crane with a crane, but such a device is quite rare. Then it is necessary to familiarize yourself with the instruction of draining water from the water heater, then overlap the water at the input to the device. For a direct descent, there is a crane in the middle between the nozzle and the valve, it is enough to open it to empty the entire container.
2. The second method involves the presence of a special lever, which greatly facilitates the task. The so-called trigger is located on a protective valve, it must be used to drain the liquid. In order to avoid the filling and devastation of containers to the navigation, the long hose is connected, which will reach the bath or sink. In the case of a full tank, water will merge around two hours. To help home masters, a video of draining water from the water heater was shot.
3. Often, unscrewing the reverse valve of the device, which serves to emergency pressure in the tank. Only unscrewing must be performed gradually. With a large volume of fluid, the initial pressure will be strong enough, then the pressure will decrease greatly. In the case when when opening the valve, water does not start running, it is necessary to check the wiring of hot water. The air in the tank comes only when the wiring is revealed. Just as in the previous way it is better to purchase a hose that contributes to the simplification of the process.
4. There is an option of the system when the check valve is moved, it is not necessary to screw it directly into the input to the heater. The placement can be thought out after the meter, then this will serve as an obstacle to the water from the tank back into the pipes in the absence of water supply. In this way, water can go to their own needs and automatically empty the water heater.
Examples of the right plum
There are features of devices, certain manufacturers in the structures there are differences. On the examples of popular water heaters, you can find out all the nuances of the process.
Termsack Equipment Solutions 
In order to learn how to merge water from the heat heater, Termex is worth reading the instructions for a separate instrument. Because the manufacturer offers models of two forms that differ in the design:
- flat;
- round.
The first type consists of two pipes interconnected. They include welded tubes for the supply and fence of cold and hot water, respectively. Heating elements are located on the flange. The second water heaters are similar design, only single.
But the sequence of actions for all devices is the same, differences appear in different systems. To begin with, the main thing is to block the receipt of the source, then it is worth merging the water through the mixer, a little liquid will be released for a minute. Then close this crane and the adjustable key is unscrewed the nuts near the reverse valve from the cutting of cold water. It remains to twist the check valve, attach the hose to the nozzle and direct the jet into the container or sewer. The air in the tank begins to come after unscrewing the nut from the nozzle.
Sequence of actions for Ariston Boilers (Ariston) 
To drain the water from the ARISTON water heater (Ariston), you will have to unscrew the plug in the top of the mixer. As always, first the access to the supply of cold water is overlapped, the shower hose is removed and the output tube valve is unscrewed. The feed hose is also unscrewed, a liquid should be released from the inlet tube. Nuts on both pipes are unscrewed, the mixer handle disassembled, then the equipment body is disconnected from the tank, but not removed to the end. So we get to the desired plug, which you unscrew. Through the obtained hole pour all the water, while you should not forget about air access through the mixer, the crane should be open.
