The flooring roof is the main place of the building, which should be protected from the negative impact of various external factors and moisture. However, in spite of complete reliability, situations occur periodically when it is necessary to repair it.

Device of the flooring roof

It is possible to equip this type of roof in several ways:

• with thermal welding;
• mechanical connection;
• with gluing;
• saving.

As for the last method, it is the most common, since it facilitates its further repairs.

Types of flooring roofing

• operated (intended to withstand heavy loads);
• non-exploited (is a durable and reliable, but does not carry out loads).

Focusing on the above, it should be noted that it is often its unscheduled overload that is often the reason for the origin of the roof.

Roofing Pie

In such a term, it is customary to be called a mounted soft roof consisting of several layers:

• initially, the foundation of the roof is produced from a vapor barrier material;
• then, the thermal insulating layer is located on top of it;
• the waterproofing is further stacked;
• the roofing coating is laid on top of the waterproofing.

The flooring roof is placed in several either one layer of a special flooring of the roofing coating.

Operation of soft floral

Care recommendations that may extend its operation:

• the roof is recommended to be constantly cleaning from iron profiles, reinforcements, branches, garbage and other building materials;
• it is necessary to regularly clean the waterfronts and drainage channels;
• in winter, it is necessary to consider snow using plastic or wooden shovels.

When repairing roofs

Defects of the flooring roof, which may occur during operation:

• mechanical and other damage formed due to improper cleaning of the roof in winter;
• damage resulting from the pressure of ice;
• loss of sprinkle top layer;
• formation of bubbles with water or air;
• peeling the roofing canvas;
• folding folds;
• the occurrence of floating;
• drainage of the roof.

If for any reason the roofing pie was tested, then it is formed to flow. The current repair of the flooring roof and the installation of patches can extend its life, but it will benefit only if damage is easy to detect. If the roofing building material is not damaged, but other layers failed, then it is necessary to overhaul the flooring of the roof.

Repair of the roof from the installed materials

The service life of such a roof depends on the type of operation and is approximately 15 years.

When repairing the floral floor, a number of works are carried out, which include the following actions:

• parapetov protection;
• updating parapete tin;
• opening the bubbles arising;
• repair or new installation of screed coverage;
• insulation flooring;
• repair of vapor barrier.

The most simple solution for the repair of the flooring roof is the autopsy of bubbles and the installation of patches, but in this case you will not receive guarantees for the work done, since this method is not considered reliable.

Repair of minor damage to the floral, instruction

1. Initially, the site should be examined around damage to determine the locations of the carpet, the presence of moisture under it and other malfunctions.

2. Before proceeding with the repair, the coverage on the damaged area must be removed and dried.

3. Then the entire bare surface must be cleared with a mechanical way and desirable to degrease.

4. After that, you need to carve new rounded pieces with a concession of 10 cm on the old building material.

5. Next, heating the prepared surface, we press the sprinkling of the upper layer into the heated bitumen and we will apply a patch to this place. Click it and smooth the roller over the entire surface.

If the damage is quite significant, then liquid mastic is used, which is applied by the same principle and with similar preparation.

Swimming of insulating layer

The renovation of bloating is made as follows:

1. Cut the envelope insulating layer on the bubble formation site, we succeed in the concrete base to 4-5% humidity.

2. We make cleaning and process it with bitumen mastics.

3. We glue the extext part, pre-warming it with a gas burner.

4. We will apply a predetermined gland from glassware, which has a protective sprinkling, top of the blown area in such a way as to block the surface of the cut by 10 cm. Cress the roller.

Top cracking of roofing carpet

This type of the defects of the flooring roof are eliminated by applying to the damaged surface of bitumen mastic in 2 layers. After coating the surface with a second mastic layer, it is covered with protective coarse-grained sprinkle.

Also eliminate the network of cracks can be used with a glassized marque with coarse sprinkle. In this case, its size must deflete the area of \u200b\u200bthe resulting defect. At the end, the installed patch is pressed along the entire surface with a special roller.

With a large cracking area, it is recommended to change the roofing cloth completely.

Repair of the separation of the insulating layer

1. The detached part of the roof is recommended to clean, and then dry.

2. Next, you need to glue it with bitumen mastic and roller.

If the glass browns were adopted, then along the rupture line you need to put the patch band in 20 cm wide from the contour.

Repair of detachment in places of adjustment to the vertical surface

1. The vertical surface is cleared.

2. Then it should be dried and processed by a bitumen primer.

3. Next, a new layer of insulation is applied to the adjoint location from bitumen weaving building materials with high heat resistance.

4. Additional edge of the carpet is fixed by mechanical way.

Repair of soft roofing material, video:

http://www.youtube.com/watch?v\u003dvj3ly2m5z0i