The type of natural wood has to comfort, so people often try to apply it when designing residential space. It concerns different rooms, including places such as a kitchen or balcony. When planning repair, many prefer the walls of the walls under the tree, because it is a safe and economical option.

Therefore, it is worth considering the various offers on the market and the options for their embodiment.

Features of the material

At all times, wood was considered a versatile material that can bring warmth and comfort to the house. In the presence of a natural tree, the whole setting becomes noble and relaxing on vacation. To obtain distinctive characteristics, all materials are subject to special processing and impregnation. As a result, the products are obtained durable and resistant to abrasion, the tree does not rot and does not mold. From wood on the market there are lining, siding, bar, block house and hewscrek.

For the trim, special decorative boards are offered, as a rule, 3 cm thick. The more expensive option are thin products, their thickness is 2 cm, width 12 cm. To finish the walls, the wood is used mainly inexpensive soft rocks, the optimal option is considered to be linden, alder, aspen or poplar. Of the expensive offers are popular are: maple, oak and ash. Among the benefits of the material are distinguished:

• convenience in work;
• environmental friendliness;
• high indicators of noise insulation;
• durability;
• wide design opportunities.

The inner decoration of walls by wood is always quick and efficiently. At the same time, all small irregularities on the surfaces do not require preliminary preparation, and the finished finish is attractive. The natural origin of the material gives a guarantee that it will not be necessary to breathe unpleasant chemical smells, a pleasant aroma of resin is distinguished instead.

Another advantage of natural wood is to maintain optimal facilities in the room. The material with high humidity absorbs part of evaporation, over time, gives it back into the air - the necessary parameters of the microclimate are ensured. All the trim can have different textures and color, thanks to which any designer ideas are embodied.

Selection of material

Before starting all the work, it is worth viewing the photo of the finished wall of the walls with a tree - a visual perception will help determine the result. Next, select the material for the plating, you need to consider the following criteria:

• wood breed;
• colors;
• quality;
• mounting type.

When considering each item, the Master will make the purchase of the required amount of material, will subsequently will not be the question of the elimination of residues. Sometimes buyers do not pay due attention to the shade of wood, although thanks to the correct selection you can visually regulate the area. If the room is characterized by small sizes, then when cladding you need to use light materials. Also contributes to an increase in the space functional zoning. Then apply a wooden trim of several tones, dark colors are preferable for the working situation.

Process technology

With the decorative trim of walls, work is carried out in three stages:

• preparation of material;
• construction of the frame;
• cleaning.

The preparation of the material involves drying wood, it is important to ensure good conditions. If the process takes place in the home environment, then pick up the ventilated room. For uniform drying, the tree is placed by layers, it is desirable to use lining for circulation of air between the straps. Larch and soft rocks drierly dry than the needle.

When finishing wood walls in a flat frame may be accomplished by wooden beams or metal profiles. But now often prefer the profile due to ease of assembly work. Under the trim frame perpendicularly skin, that is, the horizontal position of the boards planks must be fixed vertically. Frame construction not only use the presence of perfectly smooth walls. If you are using wooden planks require pre-treatment with antifungal drugs.

In humid equip mini-ventilation, which bore holes in the cladding boards. It is important to stick to their systematic arrangement to avoid a concentrated cluster. Wall insulation is provided by a heat-insulating layer which is laid in the frame. Therefore, between the beams must be maintained a distance of not more than 50 cm, the space below the skin is filled with mineral wool.

There are various embodiments of wall decoration tree, depending on the material used are two types of installation:

• joint to joint;
• using the slot system.

In the first case the lining to the frame mount screws or nails provided, it is important to align them along the strip. Since the cap on background of boards will look carefully, experts recommend the use of brilliant elements of the U-shaped hats. If desired attachment points can be disguised, it's not always the screws fit into the finished look. Then the cap is removed cutters, fastening deepen the wood. Fossa subsequently daubed with plaster and paint to match the board.

slot system assumes parquet mounting technology, ie the nails are hammered into the side of the bracket with the recessed head into the wood. As it turns out one piece of wood surface with no visible additional items.

Self-assembly

When decorating the walls of a tree with his hands preference is given to a special panel consisting of a film-coated fiberboard. Because when flat walls, they do not require a frame construction, lightweight material is securely held with adhesive tape.

Pretty complicated way is considered to be the embodiment of the Christmas figure, will need to obtain it:

• sheathing;
• protractor;
• hacksaw on a tree;
• double-sided tape;
• pencil.

Due to the nuances of technology should consider the entire process. It consists of the following steps:

• the settlement;
• layout;
• trimming slats;
• fastening elements.

On a separate sheet, you constitute a diagram of the finished wall, it is important to do all measurements with particular accuracy. Next, directly on the wall in the middle of the vertical line. From it are already repelled when laying panels.

Preparation of wooden panels implies their trimming at right angles, that is, one edge should turn out to be oblique. One half of the boards is cut off the right corner, the other is left. A thin sticky tape is fixed in three longitudinal stripes on each bar - this ensures good adhesion with the wall surface. When finishing walls, the middle elements will first be attached to the panels under the tree, two people should participate in the process. The panels are applied to the corners to the battered line, there should be no cracks between them. To fix it is enough to remove the protective film and lean items to the wall. Already pushing out from the first panels, finishing the entire surface.

This material can be used in various premises. If the design with the help of panels in the office or living room looks traditionally, then the walls of the walls in the kitchen can bring a fresh idea in the design. On the Internet there are many options for combining materials, you can learn ideas in advance for incarnation.

In addition to the article by the European Balcony Test Guide: