Interior door in the bedroom - an integral attribute of the modern room. On the criteria for choosing the design and nuances of installation work now and will be discussed.

Varieties of interroom doors

In today's conditions there is a rich assortment of interior designs with a variety of design. For their manufacture, various materials are applied.

Main criteria when choosing interior door:

• aesthetic features;
• compliance with the style of the room interior;
• reliability;
• opening method.

The main material for creating an interroom door (in the photo) - wood. Depending on the size and physical qualities of the boards and the technology of manufacturing structures is determined. Interior doors are classified depending on:

• structural elements;
• manufacturing material;
• opening method.

Depending on the components of the door there are:

• pililee;
• shield.

Pilented interroom doors

These designs are characterized by a rather complex device. They consist of:

• stoyed tsargi;
• baguette;
• lower Tsargi
• fililenies;
• upper Tsargi.

Whole boards are used as a carrier element. The carrying construction itself is grids, which has several openings. Horizontal and vertical framework elements are connected by glued spikes.

Operactions are separated by figure filile. Pilenok mount can be carried out in several ways. Usually use puzzle compounds or thin stroke racks.

When you choose such an interroom door to the bedroom, you can be confident in the strength of the wood. It does not crack, because in the production of fillets, two broad boards are securely glued.

The filler of the panel door can perform glass or wood panels (chipboard or MDF).

Shield interior doors

The main elements of the shield doors are:

• MDF;
• filler;
• veneer;
• wood frame;
• elements that enhance the frame.

Natural wood is covered with panels made from MDF. The filler is made from cardboard cells. Shield doors are distinguished by a slight weight and low price. The canvas can be solid or possess openness with glasses.

Depending on the material of the manufacture, there are such types of interior door in the bedroom:

• veneered;
• laminated;
• glass;
• plastic;
• products from the array.

Veneered interroom doors

Door coating veneer is the most common technology in order to improve the attractive appearance of inexpensive wood (chipboard, lumber from pine, etc.). On both sides, a veneer made from the valuable tree of the tree is glued on the board. Next, wood is grinning and covered with furniture varnish.

Often, veneering is used in the manufacture of shield doors. Veneered products have maximum environmental friendliness. This is explained by the fact that natural wood and special joinery glue use for their production.

The lack of interior veneer doors is the need to maintain in the temperature of the temperature regime. In the case of high humidity, wood will swell and peel.

Laminated interroom doors

Consist of wooden cloth, which is placed by MDF or chipboard panels. After that, the interior door from the chipboard is covered with a polyvinyl chloride film. Due to this, there is an improvement in the aesthetic and protective functions of the product. The door is reliably protected from moisture exposure.

Laminated products are in the greatest demand due to low cost. The quality of the door is influenced by the thickness and characteristics of polyvinyl chloride. As for the shape of interior structures, it can be completely different (flat, under glazing, with the presence of violent elements).

Interior glass doors

Transparent glass interroom door is an excellent and stylish solution with small rooms. It visually will expand the space. For the production of structures, glass is used with a thickness of more than 8 mm. Only the presence of such an impact glass will give the maximum durability of the door.

Installation of glass canvas is carried out using special canopies. The only drawback of the doors is quite solid weight. For this reason, an increased requirements for the strength indicators are imposed on the door frame.

Interior doors from the massif

Are the most expensive products. This is due to the fact that for their production it is used by the most valuable wood from oak, ash, grab, nut or teak. For the manufacture of the most expensive doors, exotic components are also used, consisting of elements of Karelian birch, ebony or red trees.

The array doors are both shield, and scribbled. Shielded products have a smooth surface that has a specific pattern. The assembly of a wooden interior door is carried out by gluing the stripping of the jack in a puzzle method.

The production technology of the most expensive doors provides for the implementation of such works:

• selection of elements by pattern;
• careful grinding of cloths;
• finish polishing.

By the way the door opening, installed between rooms, are:

• swing;
• sliding;
• folding.

Swing interior doors

Are a classic option. Fastening the canvas to the box is carried out using loops. When closing the canvas is placed in the groove. To make the door, it is equipped with a latch or lock. The best tightness is achieved by fastening the additional seal from the elastic material.

The advantages of swing products are reliability and simplicity of installation, disadvantage - the presence of sufficient space.

Sliding interroom doors

These products are indispensable with limited space near the bedroom. The sliding door is equipped with one or two stems. For their installation, they use special rollers whose movement is carried out on the guides. Due to this, easy movement of the canvas is achieved.

"Pluses" of hinting doors:

• maximum safety (excluded injury);
• a large assortment.

Folding interroom doors

According to the design of the canvas such doors resembles a harmonic. Their component is the sash connected by hinges. When closing the doors, it turns the elements in the vertical plane.

In most cases, folding products are used in the presence of a huge doorway. To ensure ease of movement, they are made easy. Although partial glazing is allowed.

Install the interroom door in the bedroom. Preparatory stage

Before installing the interior door to the bedroom, it will be necessary to prepare the opening. It must be released from the old design. If there is under the old door box of irregularities, the surface of the opening is aligned.

Buying a new interior door occurs only after measuring the opening. Before assembling the box, you should prepare a place where this process will be held. In order not to damage the floor covering, cardboard or 2-3 old sheets are laid on it.

Install the interroom door in the bedroom. Build the door box

At this stage:

• on one horizontal (top) and vertical racks, cuts are made under 45º;
• in places connecting racks, a small drill is made by holes intended for screwing the self-sized;
• with the help of screws, the racks are connected to each other.

For the correct calculation of the dimensions of the inside of the horizontal rack, it is necessary to consider:

• the thickness of two vertical racks;
• width of the canvas;
• the dimensions of the two gaps between the box and the door itself (the door should open and close without problems).

The length of the vertical stand is equal to the sum of the height of the canvas and the total length of the gaps at the top and bottom.

Install the interroom door in the bedroom. Fastening accessories

For high-quality fixation, loops should be properly placed where they will be located. Marks are made in the lower and upper parts of the end of the canvas. The marker marked the places of extreme points of canopies. The loops are applied in such a way that the extreme part of the loops coincides with the edge of the belt side.

Marking of loops boundaries. To do this, they are temporarily fixed and around the perimeter is rolled with a sharp knife. It is recommended to make several movements with a knife. At the placement of a canopy, the top layer of the tree is removed. The loops should be placed on the same level with the web. With the help of self-sufficiency, the finish fastening of canopies is carried out.

Similarly, the loops are fixed to the door frame. During this work, it should be noted that the distance from the edge of the loops to the upper and lower part of the box will be greater than the magnitude of the gaps (usually from below 8-10 mm, at the top - 3-4 mm).

It is very important to choose the correct location of the door lock and the handle. Usually, the handles are placed at a height of 1 m from the floor.

The process of parting the accessories consists of such consistent actions:

• the lock is applied to the door;
• the location of the handle is noted;
• the drill is cut with a hole with a diameter of less dimensions of the handle;
• the lock is applied to the end side of the canvas and will be burned;
• with the help of feathery drills and chisels, a deepening under the castle is made;
• the lock is placed in the recess and fixed by self-drawing;
• the handle is attached;
• decorative planks are screwed;
• the performance of the fitness is checked.

Install the interroom door in the bedroom. Installation and design box

At this stage:

• 2-3 holes on each rack are drilled in the door frame;
• it is installed in the opening;
• with the help of wedges and strut struts are placed in the required position;
• for a more reliable fixation of the design in the holes made screwing the screws;
• the level is checked correctly by the location of the racks in the vertical and horizontal plane;
• the door is hung on the box;
• the course of the canvas is checked;
• the door closes;
• another level is checked by the correct location of the web;
• all voids are filled with foam;
• voids are filled with foam;
• avenience, the excess foam is cut off.

In the event that the door frame does not close the opening, you will have to use good blocks and planks. Of course, the end of the wall can be done. But this is not a very stylish solution. An attractive appearance is achieved only with the help of good.

Doblyar strips and blocks in color and texture should coincide with the web. For this reason, they are recommended to buy in a specialized store, and not to order on the Internet.

After installing the box, the width of the unlocked opening is measured. If there is too wide enough, it is cut off. The same applies to the length of the vertical strip. Dobors are inserted into the slores of the wall of the wall and fixed by self-drawing on the outside of the box. Naturally, the holes under the self-tapping screws are made in advance.

At the final stage, fastening of platbands that close the space between the wall and the door frame are carried out. Between themselves, the platbands can come into contact both at right angles and at an angle of 45º.

Initially, the upper platband is measured and cut. It is alternately applied and cropped right and left vertical racks. After that, the platbands are attached to the box using special carnations with imperceptible hats. You can use self-drawers that are closed with decorative plugs.

Video on the installation of interior door in the bedroom