Electric hacksaw is a very useful tool for gardener. Using it, it is possible to cut dry branches of trees, cutting off the fireplace. Electribimal should be among the tools in any country house or cottage. How to choose the most appropriate model among hundreds of proposed options? To answer this question, you should learn more about the design of this tool and its capabilities.

How saber electronics works

The sovereign movement of the peel is based on the mechanism of the hacksaw. She, besides the reciprocating movement, also makes the pendulum: this is expressed in the rise of the peel when returning to its original position. Such a trajectory allows to reduce friction, which is less wearing a canvas for a saber saw. It is necessary to properly choose the speed of sawing (such a function exists), which is selected depending on the material being processed.

What to pay attention to when choosing

1. The saber handle should be ergonomic: the ease of working with the tool depends on how it lies in his hand. The angle between the handle and the blade should be approximately 70 degrees: it will reduce the load on the arm's muscles. The rubberized coating reduces the vibration and allows you to keep the saw confidently. It is desirable that the tool has an extra handle: it will work easier with it.
2. The stroke limiter allows you to adjust the cut length, which is necessary when performing certain types of work. This device is used for pressing the material being processed in order to obtain an accurate saw.
3. Hoven canvas, which completed electronics on a tree, is characterized by a shape, the size of the teeth, the magnitude of the step, the method of sharpening. From the size of the teeth, the heating rate depends, but the quality is reduced as they increase. Large teeth are suitable for rough work.
   Step value and sharpening shape determines the purpose of the canvas, which can be used for sawing metal, wood, foam blocks, plastic, sheet metal and other materials. Replacing the web must be easily performed.

Types of knife

Electribimians according to the engine power method are divided into network and rechargeable ones.
Electric saber saws (equipped with an electric cable with a fork for connecting to domestic wiring) are convenient in domestic use. They are universal: with their help you can cut not only wood, but also other materials.

Rechargeable saber saws are convenient for operation where there is no possibility of connecting to networks of centralized power supply. Such an electribal can be harvested in the woods in the forest, saw the branches of trees in the garden. The disadvantage is a short battery life and its high price: its service life is an average of 5 years.
By types of material being processed, electronics are divided into woodworking tools and for cutting metal. The first are more popular for domestic use. With their help you can process:

• boards;
• logs;
• chipboard, fiberboard and OSB;
• Laminate, parquet and parquet board.

Such a tool is necessary for laying the floor, during the harvesting of firewood, repair of furniture and other business works. The teeth of hacksaws are three sizes and are divided into:

• Large (from 3 teeth up to 6 per inch) in a step between them within 4-8 mm: used for sawing logs and thick bars;
• Average (with a step between teeth from 3 to 3.5 mm) - to work with the average size of wooden parts and billets;
• Small (step between teeth no more than 2.5 mm) - for handling small parts.

Hoping canvases should be distinguished on the corner of the tilt of the teeth. Directly use for transverse sawing material, and the tilt teeth are more suitable for longitudinal saws.
Important is the quality of quenching teeth: it allows you to process even very solid wood. But sharpening Kalenny teeth are not subject to.
The quality of the metal of hacksaws is tested by flexion in the arc: a good metal will fully restore its shape. The presence of residual deformation indicates a low quality of the material from which the canvas is made.

Electribal models from leading manufacturers

In order to make it easier to appreciate the capabilities of electrical hacksaws, present some models of leading manufacturers.

1. Sabelnaya saw Makita (Makita) became a prototype of tools of this type. The first model was produced in 1982. Since then, electronics increased significantly. For example, when creating one of the latest models - Makita JR 3070 CT with AVT abbreviation (which means Antivibration Technology), a technology facilitating work with a tool is applied.
2. Sabelnaya Bosch saw (Bosch) - a tool in which a pendulum (swinging) movement was applied for the first time. Modern electribimal Bosch PMS 400 PE is characterized by a wide range of accessories: the arsenal of removable nozzles includes files, metal brushes, rashpille and cutting caps.
3. Black Decker Saber Sabers type "Alligator" are equipped with two hacksaw blades, moving in parallel along one axis in different phases. This allows you to cut the solid oak wood with minimal loads.
4. Hitachi CR10DL rechargeable sawing saw provides cutting accuracy not only by adjusting the speed, but also with the help of LED backlight installed on the housing.
5. Sable saw intercole NP-120 / 1010E provides a high speed of the web movement (up to 3000 cycles per minute). Incinual lock makes it easier for the procedure for replacing the canvas. It is worth noting a powerful electric motor (1.01 kW) and a reliable mechanical gearbox of this model.
   
6. Sabelnaya saw Hilti model WSR 650-A is a battery, six-speed, with a vibration suppression system. The battery has twice as much capacity compared to similar models of other manufacturers.
7. AEG saber saws are in demand due to their high reliability and sawmills. The AEG US 400 XE model is balanced in such a way that it is not required for hard lock operation.

Differences between the tools of different classes

Sabelle electroopers are designed for:

• domestic use;
• professional work;
• semi-professional application.

The selection depends on the planned intensity of using the tool.
The category of household belongs to the electronics, the performance of which is approximately 25 hours a month. They are equipped with the same features as a professional tool, but cost cheaper.
Semi-professional hacksaws are larger and heavy, they are able to work up to 4 hours a day.

A professional tool has a high power and resource of continuous operation: they can work up to 10 hours a day. Higher cost is explained by the use of wear-resistant materials.