Many people seek to avoid standard solutions when repairing, so for the trim of the bathroom instead of ceramic tiles, various panels are used or staining. The last option does not lose popularity through a variety of color palette and the ability to embody original solutions. Therefore, it is so important to know which paint can paint the bathroom and how best to do it.

Design with paint: pros and cons

In support of staining of the walls, the following advantages call:

• financial savings, bathroom paint prices are much cheaper than finishing panels or ceramic tiles;
• compositions with matte and glossy effect are offered on the market, in combination of various shades, any designer designs are embodied.

With these features, creating a waterproof wall covering in the bathroom will not be difficult, all work can be carried out independently.

However, there are drawbacks that manifest themselves in careful preparation of surfaces and painstaking care of finished walls. During operation, to create comfortable conditions, you will often find painted areas.

Decide on the choice is not so easy

It is clear that in the bathroom there is a constantly elevated level of humidity, so there are two main paint requirements:

1. They should be moisture-resistant.
2. Put antibacterial protection.

These properties characterize the following types of compositions:

1. Oil.
2. Chlurcule.
3. Alkyd enamel.
4. Water-emulsion.

The first species was distributed many years ago due to the lack of a wide choice on the market. Oil paints are distinguished by a strong smell and dry during the day. However, after a short time, the painted surface is covered by cracks, and it is not so easy to remove the applied layer.

The chlorinated compositions are used in the pools, they do not let the water.

Alkid enamel is considered a universal means to protect the surfaces from corrosion, in addition, often used in outdoor work. It dries quickly, due to the reaction of the ingredients with oxygen, while the reliable protection is formed in the form of a smooth monochon layer. But in residential premises are not recommended to be applied due to a specific smell.

Water-level paints are currently in demand among consumers at the expense of their characteristics. There is a separation depending on the composition:

• on the basis of PVA not applied in wet conditions due to the lack of necessary characteristics;
• silicone has moisture resistance and countertility, but is used mainly when making facades of buildings;
• acrylic paint is suitable for bathing, while it is distinguished by the available cost;
• latex is more appreciated by the formation of an additional protective film, ideal for baths. So the painted surface keeps its appearance for a long time.

Representatives with guaranteed quality

It is possible to successfully buy a bath paint subject to careful choice, it is worth paying attention to the manufacturer of products. There are several manufacturers who have long established themselves as conscientious and reliable suppliers of high-quality paint.

There are leaders in the Russian market:

1. Tikkurila is a Finnish company that produces a fairly wide range of paints and varnishes. Especially for premises with high humidity developed the system "LUJA", which consists of primer and paint with a semiam or semi-convex effect. Paint price 0.9 L - 500 rub, primer 0.9 l - 400 rubles.
2. DULUX offers water-making compounds with a matte surface, thanks to the specially developed technology, the coating layer is reduced 10 times more than that of ordinary paint. Dulux Realife Kitchen & Bathroom withstands not only the contact of condensate, but also a frequent sink with special means. Cost 1 l about 560 rubles.
3. Jobi is a German paint, providing proper surface quality at low material value. The Jobi Waschfest Special Series is designed for the design of complex rooms, resistant to frequent care with detergent properties. Price per 1 l about 200 rubles.

Rules of the process of coloring

But, as practice shows, it is not enough to buy moisture-resistant paint for the bathroom to get a beautiful surface, ready for a long service life. It is important to correctly apply the compositions on the pre-decorated surface.

Preparatory stage

First of all, it is worth removing the previous coating from the walls and the ceiling, which includes not only paint layers, but also cladding. This can be done with a spatula, in some cases special solvents will be required. It will increase the speed of removing the trim of the Bulgarian with the emery nozzle. Next, it is necessary to wash off all dust and dirt from the surfaces, after drying it is to handle the primer.

Align the walls in the bathroom acrylic putty, which, after drying, wipes with sandpaper. It is necessary to carefully treat all areas of surfaces, because any flaws will be noticeable with insufficient alignment. If necessary, use special antiseptics that remove the fungus from the walls and prevent its appearance. Immediately before staining, a primer composition is applied in 2-3 layers.

Matte or glossy paint?

An important point is the choice of paint in the bathroom with a glossy or matte effect. It should be borne in mind that in the first case, even the slightest irregularities will be visible with sufficient lighting. But at the same time, reflective surfaces increase the space that is ideal for this room.

Matte paints help slightly hide wall defects, but they are not resistant to mechanical damage. Such formulations are universal for use in any premises, matte surfaces look elegant, fit into various design solutions.

Selection of tools for staining

There are three standard options for applying paint:

1. Brush - the cheapest traditional method of applying the composition, contributes to the dense surface coating.
2. The roller is used to obtain a uniform paint application effect. A distinctive feature is the savings of the material at the same time. For staining with water-leveling compositions, rollers with a felt nozzle are suitable.
3. The pulverizer is used in case of painting large areas. Due to the device there is a minimum paint consumption and it turns out a beautiful, evenly coated surface.

Often for household needs use brushes and rollers of various sizes.

Directly applying

Working with water-free paints for bathrooms involves drawing into two layers, because the first time the composition absorbs and does not achieve uniform application. Usually, a brush is used for the lower layer, while in advance it is worth taking care of the borders of the application. Denote them with the help of painting scotch, which will provide clear lines. The second layer is applied with a roller, which runs up in a tray with a small amount of paint. At the same time begin with hard-to-reach places and angles.

To create a simple drawing in the form of strips or geometric shapes, a greater tape is used. They paint borders - it turns out clear lines without flutters. There are also various stencils with carved patterns that create an original multi-colored surface will not be problems.