It would seem that difficult in choosing a construction room? On any construction market there are a lot of them. Choose any like. But the fact is that if you choose, then good, so to serve for a long time and was convenient to use. We in this article just tell about how to choose a construction wheelbarrow.

Parameters Important for construction car

The first thing is to pay attention to professional builders when choosing cars:

• body;
• frame;
• wheel or wheels;
• pens.

Consider in detail each option.

Requirements for the body when choosing a construction car

If the body is performed correctly, then it will facilitate your work by reducing the load on your hands. It should look like this:

• form trapezoidal;
• front at an angle. This contributes to a uniform load distribution. Big - fall on the wheel, and on average 20%;
• bottom flat, which allows you to load a wheelbarrow to the maximum;
• if you are going to carry a cargo heavy in the form of bricks, stone or blocks, then you need a construction bucket strengthened. In its design, the ribs must be present, otherwise the body is quickly deformed;
• In the case when the wheelbarrow is needed to move sand, cement, gravel, or other bulk material, it is more convenient for the body without ribs and with rounded corners;
• manufacturers taking advantage of the user rolled the board to eliminate injury about sharp edges;
• an important role is played by the thickness of the metal. Suddenly it will be less than O.8 mm, then such a wheelbarrow is better not to buy;
• pay attention to the dimensions. The wheelbarrow should pass through the gate and doors;
• check if it will be convenient to keep the wheelbarrow during unloading;
• the body must be inclined toward overturning;
• check out the same way. Do it like this: Tilt the wheelbarrow and click on it. If the frame is greatly beyond, it means that there are no backlates and buy this model is not necessary.

Frame design

The frame is the base of cars, so it should be reliable. When buying, check whether it meets the following requirements:

• there should be no welds on the frame. If they are, and even low quality, i.e. Uneven, intermittent, then this product is unsuitable for operation in conditions of construction. The correct frame is made from a whole pipe, without any seams. If the seams are still available, it is not a construction car, but a light garden trolley;
• The correct frame envelopes the entire perimeter of the body serves as a support below, ahead and holds the rear wall.

Comfortable handles

See that the handles were:

1. Long.
2. Placed so that you are easily fit between them.
3. Of not a slippery material or with plastic nozzles, rubber.

Wheels

Wheels for the wheelbarrow are:

• licenses;
• inflatable;
• diameter from 350 to 450 mm;
• sometimes with a bearing that makes the stroke lighter.

For highly heavy work, the car is more suitable for the car with a cast wheel. The product can be equipped with one or two wheels:

• two-wheeled cars are more stable. You can load a lot on them. Work with them easily;
• a single-mounted construction package provides better maneuverability, but creates a greater load on hand. The cost is different from the 2-wheel half, and then 3 times.

All setdered requirements are replied by products from well-known manufacturers such as: Russian companies Belamos, Vinco, Zubr; French firm Haemmerlin.

Cub building two-wheeled Belamos

Belamos (Belammos) offers high-quality construction workers operating in difficult conditions. Look at the main characteristics of the 2-wheel construction car BELAMOS 700P:

• load capacity in kg - 200, and in L - 100;
• Weigh 17.7 kg;
• its width is 66 cm;
• body material - 1 mm steel galvanized sheet;
• there is an additional amplification in the form of rigidity of stiffness on the sides and on the front;
• board twice spilled;
• the reinforced frame is made in such a way that the tipping is excluded and easy unloading is ensured;
• wheels - pneumatic, have a diameter of 38 cm, with the bearing;
• the body shape is trapezoidal, bottom flat;
• between wheels - 0.5 m, so the car will be held even on a narrow path in the garden.

Building car VINCO.

Especially for labor-intensive works invented a car construction unit VINCO 341 to Profi. It has a lot of advantages:

• very maneuveran and ergonomic;
• with a comfortable handle;
• maximally balanced;
• if the working conditions require, that is, the ability to remove the body;
• the stiffness of the structure is ensured by the support, the material of which is an allotted pipe;
• designed for 180 kg or 85 liters;
• body material - galvanized steel;
• wheel 1, inflatable, diameter it is 40 cm.

Wheelbarrow construction bison

A manufacturer having such a loud name - bison, produces very durable, high-quality construction cars. For example, the ZUGUB TACK 39901 Garden and construction has the following technical data:

• moves the cargo to 200 kg, and if in liters, then 90;
• body galvanized, thickness of steel 0.9 mm;
• board twice fought;
• the move is easy thanks to a special complex pattern on the treads of the wheel and the presence of the bearing;
• on the handles rubber nozzles, insuring hands from slipping.

Cub building haemmerlin.

Haemmerlin has a large 140 years of experience in the production of construction and garden sheets, both professional and use of the house.

Professional construction car HAEMMERLIN CARGO PLUS 120 PG GF

This car is adapted to transport heavy cargo and has the following characteristics:

• its carrying capacity - 0.2 tons;
• the volume of trough - 120 l;
• body deep, narrow;
• wheel - tubeless, pneumatic, diameter 40 cm, metal disk.

For work of small volumes, it makes no sense to buy a powerful professional construction wheelbarrow. They cope with them lighter.

Haemmerlin Cargo Premium 90 MG:

• she is a single one. Diameter of a pneumatic tubeless wheel 380 mm;
• a trumpot of a galvanized trapezoidal volume of 90 liters with spangled sides and a square bottom;
• will withstand the limit load of 150 kg;
• there are ribbies;
• polypropylene handles provide a good clutch coefficient;
• cub building HAEMMERLIN PREMIUM 90 MG, the photo of which is located below, like all other models of this company, are tested on the stand, so their quality is no doubt.

About these cars removed useful for a potential buyer video: