Surprisingly, to create a full mangala, which will delight owners for many years, is enough to have an unnecessary gas cylinder. In the construction market you can buy a large gas cylinder at a fairly low price. At the same time, having spent some scope of work, you can get a really good mangal for the country area. If a small cylinder is taken as the basis, then such a brazier can be safely carrying with him to rest in the trunk of the car. In this case, everything is limited to human capabilities as well as its fantasy.

Features of the mantal from the gas cylinder

It is worth noting that the stores also sell brands created by the same principle. Of course, they look much more presentable, but the manga's own manufacture of manga will save a lot of money. Also in this case, it is possible to create just such a barbecue that I want.

Very often, gas cylinders are simply ejected by car owners that construe their vehicles. Thus, it is possible to get a balloon almost free.

To create an ideal barbecue will be enough 50 liter cylinder. Small capacity can be inconvenient to use. They do not fit neither barbecue, nor skewers with kebabs. A small length of a small cylinder will not allow the coal from one side of the mangala to another.

Before any actions associated with gas cylinders, you need to make sure that there are no substances inside the vessel. If there is gas inside, then a small heating can break the balloon.

The process of creating a mantal from a gas cylinder

First you need to securely secure the cylinder, as you further have to cut it. With the help of ordinary chalk, we apply separation lines. In our case, you need to leave the side parts of the cylinder and get rid of the upper half of the vessel.

Cutting the cylinder occurs with the help of a grinder, after attaching a circle on it for metal. It is in the center of the cylinder who goes a welded seam, which is best cut. This will allow you to get the perfect result with the absence of sharp edges.

Sliced \u200b\u200bpart of the cylinder is no longer needed. If a large vessel is used, the cut part can be handed over to scrap and buy paint for this money, which is useful at the very end of the process. On the other hand, the carved part can be used as a lid and smokehouse, however, practice shows that people prefer open mangalams.

Next, you need to take care of the internal arrangement of the future mangala. To both sides of the balloon, you need to fight thin guides on which skewers or barbecue will be located. It must be done so that the guides are on the same level, otherwise there will be uneven dishes in the future. Welding must be performed qualitatively, since the design itself may fall, and poorly fixed guides - just fall off.

Instead of the guides, you can weld the metal grid, which is ideal for frying meat without skewers and a barbecue forms. Unfortunately, with this preparation, it will not be possible to get a uniform roast of meat.

Now you need to take a drill and do in the lower part of the cylinder, where coals will be located, about 20 holes with a diameter of up to 10 to 15 mm. It will create a craving during the preparation of meat dishes. Many craftsmen weld to the lateral part of the homemade mangala with a small pipe, which will also create optimal traction. During the creation of the manga, it is better to choose something one thing. Obviously, the method with holes is much easier and more efficient. Excess the number of holes will negatively affect the preparation of kebabs and barbecue in the future.

Next follows the hardest part of the work. Mangalu is needed supports that will be optimal in height for cooking dishes. During the cooking, a person spends a lot of time at the mangal, so to improve the convenience of supports must correspond to its growth. In this case, the easiest way to purchase 4 large fittings that will need to be qualitatively welded to the corners of the mangala. This is the easiest option that can only be used in this case. Quite often, people order supporting structures that crafts create, decorating wrought-iron elements. It is worth a recognition that with such a stalking brand will look really solid and presentable. For fastening supports to the main part of the manga, welding is used.

In the end, you must purchase refractory paint and cover it the whole structure. No other types of paints can be applied, as under the action of high temperatures, they just get drunk from the surface. The refractory coating will dry a lot of time, so you have to wait.

Options for modernization of the manga from the gas cylinder

Surprisingly, ordinary people are created from the gas cylinder not just a brazier, but without exaggeration art objects. It should be noted several examples of the structures of the Mangalov.

Quite often you can meet brands with additional wooden shelves, on which you can accommodate already cooked meat dishes or spices. The wooden shelf may have a metal frame, fixed with welding to the right or left edge of the cylinder. On such a small size, the shelf is best to put small containers with seasonings.

Large shelf can be placed directly on the support. Thus, the shelf will go parallel to the balloon, and be at an equal distance between the ground (or the floor) and the main part of the mangala. Such a wooden shelf must be attached on a metal frame, which will resemble a peculiar shape for wood stove.

If you create supports with a height of up to 20-30 cm, then such a brazier can easily carry in the car trunk. During cooking there will be some inconveniences, however, for such a case, you can buy a small hiking chair, on which a person engaged in the preparation of meat.