Many households sooner or later begin to think about the thermal insulation of the roof, as it carries one of the most responsible loads of the entire design of the building. It is for this reason that the acquisition of the insulation for the roof should be approached thoroughly. If the building material will be reliable, high-quality and durable, then you can forget about the problems associated with the departure of heat for a long period and significantly save funds.

Of course, exclusively with the help of the insulation, it is not possible to create the perfect heating of the house, however, thanks to him, the streams of warm air will stay longer inside the attic space.

In this article, we will look at how to choose and purchase the best insulation for the roof of your home.

Insulation for roofing how to choose

What kind of roof type is present with your home, future requirements for thermal insulation, since it is flat and scope, and can also have a residential and non-residential attic room.

Principles of choice:

• roofing insulation must be environmentally friendly;
• have excellent sound insulation;
• low thermal conductivity;
• frost resistance;
• must be fireproof;
• must maintain its geometric parameters;
• have form stability;
• a small mass;
• be durable.

Recommendations that should be followed by:

• for the leaf roof, it is better to use materials with high density;
• for unloaded designs, it is recommended to use the least rigid insulation.

Types of roofing thermal insulation building materials:

• basalt wool;

• glass gaming;
• liquid insulation;

• equata;

• polyurethane foam;
• folgized insulation;

• foamed polystalmine;
• bulk insulation (sawdust, chips, peat, slag, ceramzit);
• wood insulation (korolith, thermal, thermal storage, fibrololite).

Famous manufacturers of the best insulation for roofing

Heater for the roof of URSA (URSA)

This brand is created from high quality raw materials, following the modern German technology and is used for the sound and thermal insulation of the roof.

Heat insulation of fiberglass

Products from staple fiberglass of the URSA Glasswool brand has unsurpassed insulating properties and is suitable for performing a variety of tasks in construction. Due to its ease, such panels (mats) are easy to install and have almost no waste.

The company offers the following types of products:

• URSA P-75, P-45, P-35;
• URSA P-60, P-15;
• URSA M-20;
• URSA scope roof, etc.

Extruded expanded polystyrene foam

This type of product from URSA XPS is an excellent solution when creating heat insulation of floors, inversion roofs and underground rooms. The presented material has special physical properties, environmental friendliness and simplicity when installing. Due to the unique closed cellular structure, it provides unsurpassed thermal insulation characteristics, compression resistance and moisture resistance.

Insulation for the roof of TechnoNIKOL

TechnoNIKOL (Rocklayt) is a hydrophobized plates created from mining based on basalt rocks.

Advantages of use:

• easy to install;
• when contacting metal and concrete is absolutely neutral;
• has high strength and bowstability;
• it has wonderful sound and thermal insulation;
• low water absorption;
• used from -60 ° C to + 200 ° C.

This insulation is used for walls, pitched roofs, in ventilated facades and for insulation of partitions.

Insulation for roofing basalt

Basalt mineral fibers protrude with the base material. This building material is successfully used for thermal insulation of facades, partitions, mansard, roofing and
floors.

Types of basalt thermal insulation products:

• rigid plates (insulation for Paroc roofing (parks)) and semi-rigid;

• fibers;
• firmware mats.

Product specifications:

• hydrophobine;
• is a dielectric;
• technology in work;
• safe;
• has a small volumetric mass and excellent sound absorption;
• non-combustible, durable, environmental;
• used from -259 ° C to + 900 ° C;
• resistant to mechanical impacts and aggressive environments;
• has low thermal conductivity.

Insulation Rockwool for roofing

The heater for the roof roof is created from mineral wool, therefore it has low thermal conductivity, increased sound and thermal insulation characteristics, as well as resistance to deformation.

Rockwool International A / S products are protected by constructions consisting of combustible building materials, and also prevent the dissemination of the fire through the heat insulating layer.

At the same time, the basis of all valuable indicators of this product is the structure of the material itself. Incredibly thin fibers have a chaotic distribution in the vertical and horizontal direction, while at different angles, relative to each other. Due to this, a dense plexusion is created, as well as remarkable rigidity and resistance to mechanical effects.

Insulation for the roof of Knauf (Knauf)

KNAUF manufactures environmentally friendly and thermal insulation building materials used for floors and walls. All products are created according to the unique ECOSE® technology. The assortment of the manufacturer also shows glass gamble, minvat and polystyrene foam.

Product Features:

• convenient to use;
• easily cut;
• do not smell;
• have high sound and thermal insulation;
• low weight;
• natural;
• in the process of their production, acrylic phenol formaldehyde resins are not used.

We choose the heater for the roof video: