Livestore is one of the most interesting, but at the same time complex forms of landscape design. Its clearance will certainly bring a lot of pleasant impressions, and the result will cause sincere delight. But in order to correctly form the fence from various shrubs and colors, it will be necessary to spend a lot of time to choose from suitable plants and their most profitable layout. Prepare and to the fact that the whole process of growing alive hedge is a matter of not one month and not even the season. To get a magnificent bouquet of bright colors and the most interesting combination of various forms, first read the recommendations on the arrangement of this form of landscaping.

How to start the design of living hedges?

First of all, clearly imagine a list of all tasks, browse the photo of the living hedge, then consistently organize your actions. Focus on the list below:

1. The choice of the main direction and shape of the hedge.
2. Selection of the site.
3. Selection of plants.
4. Design and drafting scheme.
5. Installing a frame.
6. Soil preparation.
7. Preparation of plants to landing.
8. Plant landing.
   

   Important! Please note that a live fence with your own hands is a completely satisfied task, but its decision will require a lot of strength, time and knowledge.

What are the types of bleeding from plants?

To better understand what amount of work is to be performed, initially consider which type of this form of landscape design will be the most profitable and effectively decorating the site.

At the same time, it is important and ease of care for her, that is, decide for yourself in advance how much time you are willing to spend on supporting the form.

Types of plant fences determine, first of all, height:

1. Miniature hedge, up to 1 meter high. It is advantageous to emphasize the originality of flower beds or artificial reservoirs.
2. Low, the dimensions of planted plants of which do not exceed 1m. It looks very interesting as partitions to distinguish between space on the lawn.
3. The average whose height is 1-1,5m. Rational solution for decorating small fences.
4. High fence, adult plants that reaches 2 meters. Excellent option for designing gazebo in the park and garden area.
5. Live wall, the dimensions of which are achieved and 5 meters, that is, exceed human growth. It harmoniously fits such a living fence in the design of a large plot landscape with large elements of sculpture and garden-park furniture.

The following criterion is a species group of plants. For this principle form:

• Lippad non-human
• Prickly
• Coniferous
• Mixed
• Current
• Unpretentious
  

  Important! In the search for solutions to the issue, how to make a living fence, take into account not only personal preferences, but also the style of the entire landscape, so that the partition or fencing from plants has become an interesting addition, refreshing the entire landscape, and not dissonant, which does not fit into the overall picture of the idea of \u200b\u200bdesign Plot.

According to the layout of plants, the following types of alive hedge are distinguished:

• Solid
• Bunk
• Multi-tier
  

  Important! When designing, commend your real opportunities and strength. Note that, for example, creating a multi-tier composition is a complex process that requires certain knowledge and skills.

  

  Create an initially simpler form, for example, a fast-growing alive fence. After some time, when you get the necessary skills, make the place of redevelopment or add a finished fence with new splashes to diversify and improve the landscape.

Another nuance that is sure to choose in the correct, most suitable form for you - a way to care:

• formed, the plants of which are necessarily regular cut, naturally more demanding
• unformed, which is formed by natural sizes of the breed, is quite unpretentious.

How to choose the right area?

We define a more suitable part of the territory, guided by the following criteria:

1. A suitable type of soil for planting a selected plant group.
2. The presence of sufficient light for development.
3. The corresponding level of humidity. Consider, with rapid absorption, a greater flow of water and energy will be required for the operation of watering system. Otherwise, the plants will be filled or deficiently developed. With elevated moisture, the rot will appear that over time will lead to the death of a living hedge.
   

   Important! In addition to the practical side, keep all the design nuances in order to comply with all the forms as beautiful as possible.

How to choose plants for live swelling?

On how well you pick up a complex of plants depends on the attractiveness of the composition, and its longevity, and, last but not least, ease of care.

Therefore, a responsible treat this process, carefully select all the elements of a future hedge to result meet your expectations and do not cause a feeling of wasted time in vain.

What breeds are suitable for the decoration of the fence of the plant?

Taking into account not just long, but the age-old experience of growing hedges, naturally there were certain advice on plant selection.

Check them out in the following list:

1. Hedge of shrubs of one kind. This method is most simple, since it eliminates the complexity of the layout. The use of plants of one species to create a tight or a loose layer of the wall due to the close intertwining branches of the same type.
   
2. The most popular shrubs for hedges following:
   hawthorn
   spruce
   barberry
   willow
   wild grape hederacea
   elm
   vine.
   
3. Thornless deciduous hedge. For registration of the following species composition will be an excellent option:
   • cotoneaster Aronia
   • meadowsweet Van Guth
   • honeysuckle ordinary
   • syringa
   • lilac Hungarian
   • physocarpus kalinolistny
   • cotoneaster brilliant
   • japanese spirea
   • ligustrum vulgare
   • white dogwood
   • dogwood purple red.
4. Barbed fence. This form is only suitable for the walls, the height of which is not less than 1 meter. Be sure to keep in mind this caveat. To create this type of hedge pay attention to the following:
   • hawthorn
   • hornbeam
   • elaeagnus angustifolia
   • juniper
   • pyracantha scarlet
   • berberis vulgaris.
5. Hedges of conifers. One of the most popular options. This fence is perfectly combined with all forms of landscape design, while notable for its all-season. Use the following types:
   • thuja
   • red cedar
   • common juniper
   • norway spruce
   • yew.
6. Unpretentious. This type will be an excellent alternative for those who are not ready to give a lot of time taking care of plants, but definitely wants to bring to life the idea of \u200b\u200bcreating a hedge on the site. It requires little care the following types:
   • spirea "Golden Princess"
   • spiraea japonica
   • spirea gray
   • spirea Argut
   • hawthorn
   • barberry
   • acacia
   • cotoneaster brilliant
   • boxwood.
     

     Important! When choosing plants, take into account not only their beauty, but also growth rate, sizes, preservation of the form.

7. Very high hedge (3-5 meters). This category is noted separately, since for it there are a number of more suitable breeds, in the bulk of trees:
   • turn ordinary
   • irga Rounded
   • apple tree berry
   • maple field
   • maple Ginnala
   • tuya Western
   • fir Siberian
   • fir ordinary
   • alycha
   • hawthorn Siberian
   • buckthorn.
8. Living curly hedge. When creating a fence, partition or any other shape of landscape design of curly rocks, consider not only their sufficiently high growth rate, but also the density of the formed canvases. Plant branches so tightly fell supports that a year later it is no longer possible to get to them without damaging the integrity of the form. If you prefer in favor of this type of alive hedge, pay attention to the following breeds:
   • ivy
   • aristorocha
   • vintage pentalist
   • grapes attached
   • akebia chocolate
   • highlander Auberta
   • honeysuckle
   • horogogucks round
   • hop ordinary
   • clematis grape olive.

What plants exclude from the project?

A lot of time is torn to care, and some can die after the insect pest attacks and form the voids of the plants listed below:

• kalina
• lilac Lilac
• rubannik
• decorative Malina
• rose hip
• weigela
• jasmine Chubuschnik.

Important! Try, as little as possible, it is possible to draw up with these breeds or to refrain from their landing for the arrangement of living hedges.

Video

Browse the video about the living hedge, which sets out some recommendations for the choice of plants and their characteristics.

The main principles of design

To create the right Live Hollow project, be sure to consider the following recommendations:

1. Before creating your own project, consider the schemes of ready-made solutions most interesting for you, but correctly decorated.
2. In addition to the rules of the composition, be sure to take into account both the practical side and the suitability of the selected breeds.
3. Use only those types of plants that will comfortably feel on one territory.
4. Do not use aggressive rocks when the bleeding of a mixed type is design.
5. Be careful to the scale of the project, so that when transferring to the soil, the dimensions corresponded to the idea.

How to make a frame for burning from plants?

As a basis for hedges, use the finished fence or create a special framework for which planted plants will develop.

Perform work as follows:

1. Transfer the markup of the main lines of the scheme to the soil.
2. Mark with small pegs and filaments length and sweat width.
3. On the length of the length, make the markup every halfter.
4. Install small concrete pillars or metal bars (depending on the size of a living bleed).
5. Tension between them the thread of several horizontal rows.
   

   Important! This method of preparing the foundation for living hedges will exclude the wrong direction in the development of plants, therefore, do not miss this stage in order not to spend later a lot of time for correction is not very attractive.

   

How to prepare the soil under the living fence?

For the preparation of the soil, there are two directions of work:

• fertilizer to improve the quality of soil and its compliance with the selected plants
• technical work planning.

Soil fertilizer

Please note the following recommendations:

1. Simultaneously with the choice of plants, specify the appropriate composition of the soil for full-fledged development.
2. Remove the top layer of the soil.
3. Set aside.
4. After dug a ditch, pour into the bottom of the trench.
5. Add peat and compost to the bottom of the trench.
6. Thoroughly, so that the nutrients dissolve as much as possible and the soil has absorbed.
7. Use additional fertilizer with minerals and manure for hardwood.

Marking sites landing

Perform work, focusing on the following sequence:

1. Drop the trench exactly on the markup.
2. Ditch depth for landing - 0.4-0.6 m.
3. Carefully burst the ground at the bottom of the trench.
4. After the fertilizer is added.
5. The amount of water is calculated from the proportion of 30l per meter of length.
6. Lose some time to ensure maximum absorption of beneficial substances and increase the survival rate of plants.
7. Make the marking of the rows at a distance of 25-50 cm between adjacent lines.
8. Perform markup of direct plants directing plants, considering the recommended indentation of 0.2-1.5m, which is regulated directly by the size of the breed.

Recommendations for the preparation of plants and landing

Immediately before planting a live hug, prepare seedlings accordingly.

Please note the recommendations for the execution of this work outlined in the list below:

1. Remove damaged branches with the roots of the secateur.
2. Remove dry branches.
3. Cut hardwood seedlings on 1/3 part of their length.
4. Lower the root seedlings into the water and leave in this position for 2-3 hours.
5. Prepare the clay-humid solution.
6. Immediately before planting in the soil, dip the roots into the prepared mixture.

When is it better to plant a live elevation?

The most suitable period for planting the fence from plants is the middle of spring, when the cold ended completely ended after frosts at sufficient depth. If necessary, you can perform this process and in the autumn period, but be sure to several weeks before the first frosts so that the plants take place in the new soil.

How to avoid mistakes when landing?

Familiarize yourself with the most common mistakes that do not best affect the attractiveness and pomp of the living hedge. Try to avoid similar problems on your site:

1. Wooden species planted in one row. This principle will violate the basic rules of the composition. In addition, in a short time, the inconsistency of the development rates will be bright, because of which it will be problematic to issue a single layer without proper.
2. Heat-loving shrubs planted under trees with a large crown. In this case, it will not be possible to achieve conceived multi-layered composition. Shadow from trees will slow down the process of the development of shrubs and will result in their death due to lack of sunlight.
3. Locating a multi-layer conifer ingestion. The recommended number of rows for this type of fence is no more than two. In violation of this Council, the inner row will soon lose their attractiveness due to the lack of full-fledged branch care possibilities, as a result, in the center of the hedge there will be a large propeller due to drying trees.
4. Too highly planted plants (roots are at a depth of less than 25 cm). In this case, the root system receives not enough nutrients for development and is limited in the territory for germination. This certainly is soon manifested in the form of various constant diseases of the plants.
5. Late removal of sore branches. If it does not cut the patients of the plant on time, it will continue to get in and eventually, emptiness will appear in the hedge. If nevertheless were late with therapeutic procedures - rejuvenate the fence by cutting under the stump. The cultivation will again naturally take time, but in this case you will already be aware of all possible problems and will respond in a timely manner and eliminate them.

How to care for the fence from plants?

To preserve the decorative attractiveness of living hedges and do not provoke a slowdown in the process of plant development, be sure to follow the basic rules for leaving the living hedge:

• Regularly monitor the quality of the soil by processing the appropriate type of fertilizer. Conduct such work at least twice a year - at the beginning of spring and at the end of the summer.
• Adjust the watering system to a more appropriate mode for plants.
• Perform regular weeds regular.
• Control the appearance of pests and diseases in plants.
• Regularly print branches to preserve the shape of the hedge and the treatment of individual plants in its ranks.

Conclusion

Before proceeding with the design of living hedges and address all the issues on the arrangement of such a form of landscape design, think if you can pay the necessary time to fully care for such a fence. After all, not only the initial process of creating a living hedge is complicated, but also its further design requires constant care, accuracy and regular care.