Upon completion of construction of the house on their own plot necessarily question the choice of a suitable option for landscaping the rest of the territory. Today's designers offer many interesting solutions of varying degrees of complexity.

The most practical is invariably Making beds of conifers. It is noteworthy that this method is quite affordable for self-organization of space without the involvement of professionals. To perform the entire scope of work properly, please read the following description of the recommendation.

What are the advantages of registration of coniferous flower beds?

There are many advantages of such a decision, of which the most weighty are the following:

1. Saving a constant attraction throughout the year, regardless of the season.
2. The simplicity of the preparatory process for planting.
3. Minimum requirements for the care of the flowerbed.
4. Considerable time savings for full registration and further maintenance of landscape beauty such forms.
5. The lack of the need for annual updates of species, as it is predominantly all coniferous breeds - perennials.

Important! Given all the above benefits of creating flower beds from coniferous plants, it is impossible not to note the financial profitability of such a decision. Check out the photo of coniferous beds to independently evaluate the correctness of this approach when arranging your own site.

Sequence of furnaces of flowerbed

The process of forming such a type of flower beds is not much different from creating similar landscape forms from other types of plants. It is inherent in the same despicable sequence of stages, consisting of:

1. Designing the site.
2. Selection of conifers.
3. Composition of coniferous flower beds.
4. Soil preparation in the designated territory.
5. Planting acquired plants.

How to make a project of flower beds from coniferous plants?

Before making a coniferous flower, be sure to consider some criteria regarding the choice of location:

1. Sufficient access of sunlight.
2. The required amount of land for the full development of plants, especially when choosing large breeds.
3. The features of the soil is its composition and the level of humidity suitable for landing shrubs and trees of this type.
4. Dimensions of the entire site.
5. Relief of the local area.
6. Features of architecture at home.

Important! To competently compile your own project, be sure to preview the photo of the coniferous flower bed design options. Such an approach will exclude the manifestation of common errors after some time, as the seedlings develop.

                                                                                

Options for coniferous flower beds

First of all, when drawing up an individual design of coniferous flower beds, decide on the most suitable type, focusing not only for personal preferences, but also to the rational use of the entire area of \u200b\u200bthe landscape. Only with this approach is decorated, the green zone will become really attractive, attracting the view of the site.

There are quite a lot of arrangements to arrange, so carefully consider each of them before making the final choice.

Important! If your own skills for competent design design are not enough, do not seek to immediately create complex options. Prefer the methods in which there will initially need minor time and effort costs, but with the possibility of further expansion as fantasy develops.

What types of plants to choose?

When solving the question of the species diversity to arrange its own coniferous flower beds, be sure to consider the following criteria:

1. The size of adult plants. Give preference to suitable rocks, taking into account the total area of \u200b\u200bthe local area. In a small area with a single-storey small building, too high trees in 10-15 meters will look at at least strange and unlikely to provide the conceived attractiveness of the entire landscape.
2. Development speed. In order for the created flower bed, attractiveness in the artistic picture of the entire landscape of the nature of the local area, combine the types of coniferous plants with uniform development.
3. Hue. Despite the lack of colors, the shade of plants of this type has no less meaning than all other criteria. Pay attention to the combination of different breeds, how harmoniously will look like a flower bed with their landing nearby. Many types of conifers have a bluish shade or slightly muffled green, which do not always look beautiful in combination with bright and juicy shades.
4. Ability to combine. We will certainly consider both growing conditions on one site for all selected breeds. For example, cedar and pine do not always tolerate the neighborhood of fir or christmas tree. Very good in this regard and larch. It is impossible to combine fir from the thay in close proximity.

Popular breeds of coniferous plants for the design of flower beds on a private site

1. Spruce.
2. Pine.
3. Thuja.
4. Fir.
5. Juniper.

Important! Depending on the type of the selected landscape form, select suitable types of these breeds in the most interesting possible combination. In addition to conifers in some design variants, a suitable solution will be the dilution of flower beds by plants of another group.

Types of coniferous flower

View carefully proposed ways to organize such a landscape form. Each description of the disembarkation scheme attached photo of a flower plant with coniferous plants for the convenience of perception.

Methods of arrangement:

1. Compact. The main advantage of this option is a small area necessary for the location of several plant species. One of the combination methods acceptable to compact flower beds includes the following breeds:
   • juniper coastal;
   • mountain pine;
   • western Thuja.
     

     Important! This method is a great option for the design of walls or fences.

2. Bunk composition. In this case, carefully pick plants for each layer, focusing on their dimensions in adulthood. One example of a flowerbed scheme from coniferous plants of this type is as follows:
   • juniper under bed and scaly landed in the first tier;
   • juniper horizontal and rock molded in combination with a mountain pine in the second layer.
3. Horizontal flower bed. For the design of this landscape form, the surface relief should certainly be gently and on the same level. Most often, for its arrangement uses several types of juniper, planted with rows on one line, for example:
   • Prince of Wales;
   • Andorra Compact;
   • Molded virgin.
     

     Important! If you decide to give preference to this type of coniferous flower beds, take note that to increase the attractiveness so that planted cultures do not merge into a single mass, you will need an additional decoration with stones.

4. Large. This method apply only if the area of \u200b\u200bfree space is not limited to small sizes. When choosing a place to accommodate such a flowerby, focus on sites near the fences or other types of fences in the green zone. Check out the species diversity of the proposed flower beds scheme from coniferous plants:
   • directly along the fence, rent an ordinary juniper;
   • subsequent number followed by the Western Tuy surrounded by the middle juniper at the edges;
   • for the composition of the song, use mountain pine pine on the strain, medium barberries and scaly juniper;
   • the next layer form 2-3 species from the horizontal juniper.
5. Forester beds. This composition is placed from the trees of the following species to recreate the natural scenery of the coniferous forest:
   • rock juniper;
   • fir ordinary;
   • low mountain pine pine;
   • canadian fir.
     

     Important! Add lilac or barberries to refresh the artistic picture of greenery and emphasize the naturalness of the flower beds.

6. Composition from a combination of conifers and decorative stones. This direction will allow creating a natural mountain landscape. Browse the description of one of the options for designing such a flower beds:
   • in the center of the landscape composition, install a cliff of the natural stone breed;
   • the rest of the space of the Middle Flowers Lay Middle Juniper;
   • in the background, plant 2 high Tui Western;
   • the front line of flower beds place the soil plants of a flat form;
   • over the entire area of \u200b\u200bthe territory of the territory of the territory of the territory, laying out the decorative stones of a small size, which in shape and color will correspond to the lump in the center.
7. Flowerbed, located on a plot with uneven relief drops. Such a composition will help favorably hide the disadvantages of the territory without additional costs and great physical efforts. Consider a description of one of the examples of this option to more clearly imagine the task:
   • in the center of the flower beds, plant Eastern or Mountain Posina;
   • extreme plots. Take the Cossack and horizontal juniper;
   • in the background, there are 2 Western Tui sequentially;
   • one edge of the rear plan to place with the help of a Japanese larch, the second - Barbaris Tunberg;
   • around the larch to place several bushes of the middle junition machine.
8. Living fence from coniferous. This method will make it easy to delimit the entire territory of the site into separate zones. It is planted in two cascade rows:
   • back plan. Take a spiny and Chinese juniper;
   • ahead put plants of a smaller height - oriental, medium and coastal juniper in combination with an ordinary low-spirited fir.
9. Complex composition. This option will have to taste for whom the design process is very entertaining. One example of a ready-made solution is a five-layer flower bed with a carefully thought out species nearby, is shown below:
   • the first rear row is 2 rock juniper, Barbaris Tunberg, the middle juniper and the two Western Tui of the Holmstrup varieties with a small indent to 1 meter from juniper;
   • the second row procedure to the horizontal juniper "Blue Chip";
   • the third layer - opposite one of the Tuy of the first row, plant a western other variety, for example "Europe Gold", then place Japanese spire;
   • for the next line, use West Globos and horizontal juniper, but another variety. An excellent option will be "Prince of Wales";
   • for the last fifth row, prepare the same conifers as in the previous layer, but combine them with more Merova and similar cereal plants.
     

     Important! When landing, withstand the sequence from left to right. In addition to plants, take care of the choice of suitable stones so that the formed flowerba differs not only by special beauty, but also originality.

10. Symmetric flower bed. This method is an excellent solution for landscape design in English or French style. The clarity of the shape and the correct geometry will emphasize the restraint and will help properly zonate the entire area. One of the options for designing this type of coniferous flower beds is proposed below:
    • composition Center Subscribe with 2 Canadian fir trees;
    • on the right side of them to plant a horizontal juniper;
    • to decorate the left part, give preference to the lying juniper.

Rules landing plants

The entire process of design of coniferous flower beds is not particularly difficult. Nevertheless, certain rules exist. Check carefully with them before creating such a landscape form to ensure the full development of plants and the attractiveness of the local area.

Sequencing:

1. Record the land plot under the flowerbed according to the project.
2. Remove the top layer of the soil.
3. Mix this soil with sand and peat.
4. Make the circuit of flower beds by border bricks, selected in advance by stones or other selected way in design project.
5. Mark plants planting sites by pegs.
   

   Important! Be sure to take into account the necessary indents to eliminate the death or fading of plants due to the insufficient territory for development.

6. Drop the pits to each plant in a depth of 0.5-0.7 m.
7. At the bottom of the layer of pebbles or sand at 15-20 cm to ensure good moisture circulation.
8. Add fertilizer to each yam suitable for selected type plants.
9. Install seedlings in the pit.
10. Put with the prepared soil.
11. Match.
12. Pour carefully.
13. Add a layer of soil and scree it well.
14. Perform mulching with a suitable material.
    

    Important! To perform this work, select the option that will not only carry a practical burden, but also serve decorative design, such as woody cortex, fine colored crushed stone, sawdust.

Video

Browse the video in which the entire process of planting coniferous plants is clearly shown in order to more clearly imagine the amount of upcoming work.

Features of the care of coniferous flower

So that all plants on the coniferous flower bed quickly climbed and develop in accordance with your idea, certainly perform all the necessary treatments:

1. In the first year after landing, add anti-stress drugs to the soil, which will accelerate the adaptation of seedlings in a new place.
2. Provide timely sufficient watering and spraying crowns of trees and shrubs to prevent their drying.
3. Take a trimming of old dry branches and decoration of the crown shape.
4. So far, plants are in the process of primary development, in the cold season, create additional protection against frost, for example, using kraft paper.

Video

Browse the video in which one of the variants of decorative molding of coniferous plants is proposed.

Conclusion

As you have already been convinced, the entire process of arranging coniferous flower beds is not particularly difficult, nor in the planting process, nor when caring for an already ready-made landscape form. The main condition is to correctly pick up the species row of coniferous and competently place them on the site. In this case, you will receive an excellent result of a beautiful selection area with low time and strength.