The bulk tracks from rubble - the original way of registration of the pedestrian zone of the entire portion of the green zone. Such paths in the garden or on the territory of the lawn, harmoniously fit into the picture of nature, especially naturally. The indisputable advantage of such a form of landscape design is the ability to fulfill all the work independently because of the simplicity of the entire process. At the same time, it is almost impossible to create two identical paths from rubble, each project will be absolutely unique.

How to make a path from rubble with your own hands?

The entire design process is not complicated and at the same time entertaining.

The main thing is to consistently perform all the necessary work, carefully consider the calculation and choice of the material itself so that the color palette and the form combined with the rest of the geometry of the whole corner of the wildlife.

Sequence of steps:

1. Landscaping.
2. Choosing rubble.
3. Preparation of soil.
4. Formation of the track.

The basic principles of the design of the pedestrian zone on their plot

To properly arrange the path in the dacha from the rubble pre-lay the site layout.

Pay attention to the following recommendations:

1. Do not try to adhere to a strict geometric form. In essence, the bulk tracks is imitation of natural streams that amazeing the unusual of turns and the wave-like coastal edge. Therefore, smooth winding lines only emphasize the natural beauty and the extraordination of such a form of landscape design, and not its artificial origin.
2. Before the embodiment of your idea, browse the photo tracks from the rubble of finished projects. More complex combined forms, for example, are particularly interesting, for example, from a combination of gravel embankment with wooden sleeves, concrete slabs, stone blocks. Think out possible interesting non-standard solutions for your site. Their arrangement will take a little longer, but will certainly be happy to look for a long time with its originality and hardly the beauty of such paths will quickly bother.
3. Properly relate the scale of the territory and the amount of material required so that the garden track from the rubble has become a really small-time event.
4. When choosing additional materials, be sure to consider the convenience of future walks. It is irrational to put stone boulders in the middle of the paths, having a passage. Right will be located on the side of the road. If they prefer plates with an interesting geometric shape, be sure to check that the material does not slide. This will save yourself from falling. In the event that your choice fell on wood, note that you will need additional processing of the material to increase wear resistance and strength to eliminate rapid destruction under the influence of natural phenomena and constant loads.

How to choose and prepare crushed stone?

When choosing a basic material to arrange a bulk track, consider the following criteria:

• Stone breed. Prefer the granite, which is based on natural durable stones - mica, quartz, granite, swop. The gravel, which is formed when crushing limestone rocks, is suitable only with alleged minor loads.
• Form and size of fractions. In this regard, there are several tips:
  • Small, streamlined shape, rubble more convenient for hiking leisurely walks. Its use will ensure comfort when doing. With a moving active vacation, with a possible mechanical load, for example, a blow from the ball or the use of a mechanical method of cleaning the territory, individual elements of such an embankment are flying down to the parties, and in their place the excavations are formed, which over time spoil the attractiveness of the entire track. Also, the use of small rubble requires a more thorough initial traam.
  • A large cornerstone crushed stone allows you to create a more dense layer with the necessary minimum regular care. But note that individual fragments are stuck in the rake when cleaning the area manually.
• Hue. Color gamut Pick in accordance with personal preferences - it can be natural shades, and artificially painted in bright unusual colors of the granules. To give any specific recommendations in this regard is quite difficult. The main requirement is a harmonious combination with the color palette of the entire landscape.

How to prepare the territory?

Delive to the fulfillment of this work very responsibly.

It is on how correctly the soil is prepared for a bulk track depends on the duration of its operation without the need for repair work and simplicity of care. More precisely, all the terms of the instruction are met, the less often the weeding and additional rambling.

Important! Please note that it is the preparatory process more time-consuming than directly designing the surface of the bulk track from rubble.

Sequence of work:

1. Make marking on the contour of the bulk track.
2. Use the pegs and rope for this.
   

   Important! Walk along the entire length of the track to appreciate the beauty of the view and convenience of the walk. Such an action will make sure that the design is correct or reveal and immediately correct the shortcomings.

3. Treat all weeds with a suitable solution to exclude their transfer to neighboring territory or germination on the path of the path.
4. Remove all weeds.
5. Drop the trench in a depth of 15 cm over the entire area of \u200b\u200bthe track.
6. Thoroughly confuse the bottom.
7. Put the geotextile on the entire area of \u200b\u200bthe bulk path to prevent germination of grass and weeds in the thickness of the track.
8. Install on the edges of the track border tile, plastic lawn ribbon or board of an appropriate height to secure the shape.
9. Pour a layer of 5 cm of fine rubble, whose fractions do not exceed 3 cm.
10. Match.
11. Wet the sand prepared in advance.
12. Pour a layer of 3-5 cm.
13. Cross and confuse.
    

    Important! The two layers decorated will ensure good regulation of moisture, not allowing moisture stagnation and drying the soil.

When arranging color tracks, perform additional actions by issuing the basis for the placer:

1. Prepare asphalt pieces or asphalt crumb.
2. Spread on a plot corresponding to one shade.
3. Melts with a burner or soldering lamp.
4. Apply crushed the desired shade.
5. Repeat the procedure until the track is full.
   

   Important! Be careful when arranging the subsequent parts, so as not to deform the non-frozen asphalt-crushed stone shape of the previous fragment.

6. Wait for full frost before starting operation.

How to make a path from rubble?

Creating a surface layer of a bulk path seems the most simple of all previous steps that will not take much time. In order to complete all work, it is enough to perform the following steps:

1. Install stone boulders or other selected material along the path framing.
2. Put a layer of rubble with a thickness of 5 cm.
3. Cross and confuse.
   

   Important! For the arrangement of combined paths, before pouring a layer of rubble, set all the elements of larger fragments.
   

Video

Browse the video in which some ideas are given for the design of your site with a decorative rubble.

Conclusion

The arrangement of bulk tracks from rubble is an excellent option for paving paths, which gives a number of indisputable advantages and does not differ in high cost or complexity. Given these features, in the modern direction of the landscape design, crushed stone is an excellent alternative to concrete monolithic paths and even paving decorative tiles. The result of the work is certainly original, beautiful, the most natural landscape.