Every summer visitor tries to arrange land in accordance with their requirements. This applies not only to the placement of cultures, but also such ancillary facilities as a bathroom.

It is difficult to imagine a comfortable the completion of the working day without a refreshing summer shower. Therefore it is necessary to consider its construction.

How to build a shower

Selection structure type will depend on the material and the residence time in the country. If you are planning a long holiday or permanent residence, it is better to build a steady shower. But if the site will be used for planting crops, it is quite possible to do a simple design.

Action plan

In order to build a shower in the country with their own hands in advance should consider the following questions:

• embodiments of the base arrangement;
• material for execution cab;
• necessary equipment;
• methods for replenishing water and its heating.

construction of foundations

At the first point it is worth noting the need to organize drains. In areas where its own or centralized sewage is located is easy, it is connected to the drain with a ditch. You can also dug the pit under the shower, the volume of which should be equal to the volume of water tank. Then the drain pit will not quarrel, and the used stocks will be disposed of without delivering the hassle.

It is important to strengthen the walls of the pits by concrete, sufficiently layer 20 cm. To absorb water from the shower, the finished pit is falling asleep with sand, gravel and a large stone in equal proportions. This will ensure the drain filtering, all harmful substances will independently neutralize in the autumn-winter period. The base is concreted with the deepening or install a metal pallet.

If the souls are intended only for summer rinsing, then the water used can be directed to the beds or remote sites. It is necessary when making the base to make a bias from three sides, then the water will flush to a point located in the middle of the fourth wall. From this place to collect a ditch to the required site. The base is enough to cover with a piece of rubber or linoleum. If desired, a metal tray or a pipe cut along insertion is inserted into the ditney.

Construction of the shower

The choice of materials and the method of erection directly depends on the water supply. If water container is mounted on the roof of the structure, then you need to calculate the parameters of the future structure. The frame must be durable and withstand a serious load. And the walls are to protect a person inside the cab with the environment and prying views. It is better to pre-draw the drawing of the shower for the cottage, it will be easier to work then.

For a frame, you can use wooden poles or metal pipes, corners. During the installation of the supports, the pins are 50-60 cm deep. For fixing the timber or pipes in a vertical position, they must be concreted. Pre-racks are treated with an antiseptic, turn the rubberoid. In order for the solution well, it is necessary to leave the frame for 3 days. If you choose a variant of wood, then a ram 10 cm thick is perfect. Metal pipes must have a diameter of at least 5 cm.

Then make the upper and lower strapping, cover the roof. To do this, rafters are fixed on the upper strapping, the design is covered with iron sheet. It is metal that contributes to the rapid heat of water for swimming.

Walls can sow wood, straightened or slate - are the simplest options. The wooden shower for the cottage is a practical and inexpensive option, so it is very common among home masters. Sheets or boards are simply fixed to the main racks bolts. It is important to pre-process all materials with protective impregnations from moisture.

Sometimes instead of tough trim prefer to use tarpaulin or flannel, then at the end of the season you can disassemble such a cabin. If the doors are wooden, then they are just hanging on the rack. In the case of a soft sheat, the material uses for the manufacture of the door.

Design equipment

After that, they are engaged in installing the tank. Take barrel per 100-200 liters or plastic capacity of any form. Capacity is desirable to pre-prepare: paint black, pick up a suitable cover to exclude garbage from entering water. In the barrel, they make a threads with a thread, a crane is installed on it and the scattering nozzle for the shower is put on. Additional shelves and hooks are installed as desired, some people make accessories from ordinary plastic bottles.

Before building a shower in the country, it is worth considering the filling of the tank. Sometimes the pump is used for these purposes, but not always the equipment is present in the farm. Therefore, more often the water is gained using a hose - this is the easiest option. Then, in addition, the staircase is required near the soul.

In order to constantly be warm water, you can mow in the tank tank, carry out electrical wiring. It will ensure hot water even in cloudy weather. But the container in this case should be metallic, plastic products will not fit.

Before using the soul, the wooden flooring is made. Thanks to him, the floor will not slide, and the legs do not get flowing water. For this, the timber is 100x40 mm, bonded it with each other by the stakenist. The gaps between the straps should be no more than 30 mm - it contributes to the rapid drying of the wood and eliminates the grinding process. The resulting ladder must have an area covering the entire base.

Mobile options

To make a summer shower in the country, it is not necessary to build a capital structure, a mobile design is quickly installed from simple components. There are special sets of portable soul, in stores you can find a cheap option. The set includes:

• tank bag for water;
• rope for hanging it;
• handle-carrying;
• divider.

If necessary, the bag is filled with water, the standard volume is 20 liters. It is left for heating to the sun, such a quantity is heated in just a few hours. To make the shower, it is enough to suspend the bag at an altitude of about 2 meters, open the crane. Water will flow for about 10 minutes, during this time you can have time to wash with several people.

Easy open solution

For the construction of an open shower for giving it will take quite a bit of time and money. First choose a sunny place near the wall. Provide water supply - you can bring a water pipe or pull the hose, fix the source on the wall. For convenience, it is located on the pipe to wear a watering divider, attach a shelf, hook. As a side walls, it is convenient to use the screen, it can always be removed if necessary. In another embodiment, the arcuate tube is mounted into the wall, hanging a curtain or oilcloth. The non-slip base surface provides a rubber rug or wooden ladder. Ideally, the wall is protected by tiles or plastic, then you do not need to worry about the action of water on the material.

Modern technologies for comfort

If, when erecting the summer soul, use modern materials and technologies, then you can wash it in it in early spring. For example, the cabin made of polycarbonate will not pass the cold air inside. It is only necessary to ensure water heating, some people try to immediately buy a tank with automatic equipment. In this case, when connecting to the network, the parameters of the selected mode are maintained, and water is periodically warmed up. Mounted Polycarbonate Cabin is easy - you need to create a frame from the profile, to screw the sheets to it. With such a task, any home master will cope with such a job. Before building a shower for the cottage is worth viewing the thematic videos and photos - it will help make a clear action plan.

Offers from the manufacturer

In order not to think about how to make a shower at the cottage worth consider the option in the store. A wide selection is represented by sets from various materials. It can be plastic, metal, polycarbonate or wood. The price of simple options begins from 10 thousand rubles, for the construction of polycarbonate will have to give about 25 thousand rubles. Next, the collection and installation is conducted in accordance with the manufacturer's recommendations.