Today pleased your child enough. And it is not necessary to attend the entertainment centers and parks at all for this, it is enough to build an interesting playground on our own plot, on which he can play plenty with friends.

Today we will tell about one important element of the children's town - swing and provide complete information on their own assembly.

Design and types of swing for children

Today there is a huge number of types of swings that can be taken as a basis for the manufacture of own. At the same time, they can be wrapped in cloth, cut various patterns on the planks, and also paint.

Types of swing for children:

• suspended swings for children;

• street swings for children;

• home portable and stationary children's swings;

• swing for children outdoor;
• plastic, wooden swing for children, etc.

Thus, the aforementioned products intended for children, there are a huge set, we will dwell on simpler models that can be built with your own hands.

Recommendations:

• for the manufacture of children's swing, it is recommended to take solid trees, namely Berezu, Elm or Oak;
• position the product on herbal lawn to avoid bruises when jumping a child with swing;
• make all fasteners maximum reliability;
• take care of a small cushion on the seat of the swing;

• place the product in the shade and good viewing areas.

How to make a swing for baby

swings

If your summer cottage is a tree that has a rather strong horizontal branch, located at a height of 1,8-3 m and a diameter of about 15 cm, then it is possible to build a swing:

• fix on strong thick rope plastic or wooden seat;
• do at the two ends of rope loops;
• perebroste its ends through the branch and tighten;
• pass the other ends through the holes in the seat and tie a double knot;
• seat swing set.

Simple option for the child swing

The easiest for self-construction products are a swing set by the letter "P". In order for them to build, we need 2 metal or wooden post, or 2 bent tubes, the ends of which will subsequently be digged into the ground. Height and diameter of the poles should be chosen, at its discretion, always taking into account the weight and age of the child. From the same reasons podobiraetsya and horizontal bar.

Progress:

• initially poles should be to dig to a depth of about 0,80-1 m;
• then they fixed horizontal bar. Fixing is performed by means of screws or large diameter of bilateral welding machine;
• further crossbar using ropes fixed wooden seat thickness of 3-5 cm.

Original children's swing

Instead of the usual seat can be hung on the ropes the old tire from a tractor. If you use a rope, it will be positioned vertically, if you want to do it horizontally, then take the 4 ropes and tie them at the same distance.

It is also possible to arrange a teeter of a metallic ring to which crosswise fixed multiple circuits. So to get the basics for seating. To chains were pleasant to the touch and soft, they can wrap strips of fabric and polyethylene or put in pouches, intended for pipe insulation.

Children's swing rocking

For the manufacture of such swings for children with their own hands, we need:

• waterproof glue;
• wooden beam of square section;
• colored enamel;
• multilayer sheet of plywood having a thickness of 1.8 cm;
• self-tapping screws.

Progress:

1. Create a drawing of the elements of the swing on the Watman Sheet in Real.
2. We carry the cut out of milets on Faneru.
3. Drink a jigsaw each detail.
4. The edges of the parts are processed by the sandpaper, and the largest element of the plane to get a cylindrical shape.
5. We produce assembly with glue and screws.
6. The finished product is covered with enamel.

Swing for kids from 3-4 years

At this age, kids should organize the most secure and comfortable seat of a small square pine board with a length of about 40 cm, since it is simply processed.

In addition, you need to take:

• 2 durable cables;
• 5 wooden slats having a width of 6.5 cm, a length of 40 cm and a thickness of 2 cm;
• 4 Copper tubes with a diameter of 2 cm, 2 of which will be 12.5 cm long, and the remaining is 6.5 cm.

In a board designed for seating, make a 0.6-1 cm in each corner of the 1st hole, as well as in 4-stranded, at a distance from the edge of 4 cm. The 5th Planck will be needed in order to The baby was kept for her. She is fixed in front of the swing. At its edges, too, drill holes with a diameter of 1 cm to secure cords to raise them.

The length of the cables will depend on the height of the spaced swings. The first cable should be done on the one hand, starting from the seating, then into a short tube, side planks and backrest bar. Then they are fought in the front of the side planks, then in the front bar and a long tube, as well as through the seat in the seat.

These manipulations must be done with the second cable.

Upon completion of these actions, the ends of the ropes are firmly fixed under the seat. Such swings are mounted using ceiling hooks on the horizontal bar.

How to make a swing for children in the country area of \u200b\u200bthe video: