Protective rolling shutters on windows are a set of web consisting of special lamellas or profiles. The latter are closed with each other with the castle that allows the canvas to curl into a rather compact roll.

Advantages of installing protective roller blinds on windows

1. Create protection of glasses from moisture and dust.
2. Are a good alternative to steel and metal lattices.
3. The cost of heating costs to 40% occurs.
4. Create excellent sound insulation.
5. Keep in the room coolness and heat.
6. Have a wide selection of colors and protective boxes.
7. Occupy a minimum place.
8. Adjust the penetration of sun rays.
9. Have a long service life.
10. Protect the room from hacking.
11. Easy to maintain.
12. Do not hinder emergency evacuation.
13. Have increased fire safety.

Installation Roller shutters on the window can be made:

• in kiosks;
• on the inner partitions of stores and warehouses;
• on the windows of the apartments;
• offices, cottages;
• cottage, etc.

Features of the roller shutter installation on plastic windows

Thanks to the rollers that are installed on the windows, you provide a double air layer: the first - between the canvas and the glass, the second - in the voids of the lamellas. The design of the finished canvase almost does not have cracks and perfectly protects against various atmospheric phenomena and drafts.

Metal roller shutters on the windows there is no need to keep in a closed state. It is enough to isolate a double-glazed window at night and convert day during the day.

For more wealthy people, manufacturers took care of the possibility of installing an automated "intelligent" roller control system, which closes and opens a web depending on the air temperature, the degree of illumination and other weather conditions.

In the summer period, such a system is reconfigured, and rollers begin to function in the opposite mode, namely closes during the period of increased solar activity and open with a decrease in temperature.

The high protective properties of window rolls are due to the fact that the latter are made of aluminum lamellae, which are then covered with a special polymer material. Such products are distinguished by:

• resistance to ultravioleti;
• corrosive resistance;
• environmental friendliness;
• strength, etc.

Roller shutters on the window: Design

Base structural structural elements:

• protective cloth;
• lamellas;
• guides;
• control mechanism (combined, electrical, mechanical);
• details of blocking and control (lock key, remote control, handle, switch).

The main feature of the design roller is that in the closed state it is almost impossible to dismantle outside.

Today manufacturers offer several options for rolling profiles:

• with solid pencils;
• with soft fuels;
• extruded aluminum profiles (are the most durable).

In addition, protective rollback profiles can be:

• perforated;
• whole.

As for the installation of roller shutters on the windows, they can be installed both on the outer and on the inner surface of the opening (built-in and overhead installation).

Roller shutter control can be carried out:

1. Mechanically.
2. With the help of an electric drive (automatically):

• ribbon;
• cord;
• cardan;
• spring-inertial;
• intravenous, etc.

Roller shutters on the windows: types of installation with outdoor box

1. Outdoor installation.

In this case, the boxes and guides are fixed to the outer panel using anchor bolts. This type of installation is used if it is impossible to install a rollstock inside the opening.

2. External built-in installation.

Here the rolling box is hidden in the opening. This type of installation fit perfectly into the interior and is used when the required distance for installing the box is present between the upper frame of the window and the plane of the opening.

3. Internal posting installation.

It is used when the risk of damage to the glass unit is found, as well as the complexity of the installation rollside on the external part of the structure.

4. Built-in installation rolls in a box.

Such a combined type of installation of the box outside and inside is used in cases of certain technological features of window openings.

Roller shutters on windows with your own hands: recommendations

Since the installation roll can be 2 types - invoice and built-in, then the features of each method should be noted:

• the second option increases the level of security, but narrows the lighting opening;
• the first way in light opening is not reflected, but the level of safety significantly reduces.

How to install roller shutters on the windows

Progress:

1. Initially, carefully unpack the rollside on the clean platform.

• make marking under the mounting holes with an equal step;
• drill both walls with a drill with a diameter of 8 mm;
• next, drill holes for plugs up to 1.2 cm.

2. Then make the preparation of the guides:

• make marking under the mounting holes with an equal step;
• drill both walls with a drill with a diameter of 8 mm;
• next, drill holes for plugs up to 1.2 cm.

Recommendations:

• with the built-in type of installation of the holes, it should be created with a diameter of 8 mm from the slot side through the inner walls;
• then we prepare the holes for the electrocabylon in the rear wall of the box and in the side covers.

3. Next, create a connection of the guide with the box:

• initially, we set them into special lid grooves;
• then we put on the slats for the canvas.

Recommendations:

• with the built-in type of installation, you must fix the box with the guides in the window opening;
• with an overhead mounting type - on the wall plane with a window.

4. Installation of the canvas:

• insert the rigels into the top bar of the web;
• then their axes by mounting into the holes of the rings;
• we reduce the rings of the rigels until it stops and fixes them with the help of screws.

5. Installation of the electrical drive switch:

• considering the lower and upper regulators, set the position of the canvas using a hex key;
• the upper position is adjustable so that the bottom plank is in the opening when it is located on top.

6. Close the box cover, remove the protective films. Test system performance. The finished mechanism should not have eaten and publish outsided sounds.

Recommendations:

Instead of self-tapping screws, it is best to use rivets, and fasteners hats need to be taken - it will give the design reliability.

Cutting Mounting roller shutters on the video window: