An excellent addition to any incoming territory will be an attractive and well-kept emerald lawn. In order to achieve such a result, a rather painstaking work will be required, which sometimes takes a lot of time. To reduce the costs of precious minutes, cutting them to the detriment of personal stay, take care of the necessary additional equipment in advance to simplify the process of incarnation of your designer idea on the design of the green zone. First of all, it will be necessary to buy a manual rink for lawn or make it yourself.
Content
Why do I need an ice rink for the lawn?
It is difficult to overestimate the significance of the presence among garden tools such devices.
With it, you can easily and quickly deal with the following tasks:
- Alignment of the ground surface.
- Lot Processing - mowing, watering, which will differ utmost ease.
Important! Perfect roller for sowing a lawn as a compaction device.
- Maintaining aesthetic appearance of the lawn.
- Destruction of ice in winter.
- The regulation of moisture and oxygen circulation in the soil.
- Seal repaired areas of the lawn.
- Formation of footpaths and trails, especially sand and gravel.
- Removing bumps and other embossed defects throughout the area, which is so necessary for safe operation.
Important! We note another important nuance as the advantage of using such a tool - preserving the integrity of the equipment for the bow. When processing the lawn without any soil flaws, the bunge of the cutting parts is much less likely, which entails and financial profitability.
Types of lawn rolves
There are several criteria for the classification of rinks for lawn:
- internal filler;
- the weight;
- the width of the processing part;
- functionality;
- principle of management.
Important! The weight of the drum affects the effectiveness of the seal, therefore, for example, equipment will need equipment with a large indicator - up to 120 kg, the weight of which does not exceed 50 kg, the weight of which does not exceed 50 kg. The optimal width of the tamping part depends entirely on the characteristics of the site, as it affects the unite capture of the processing territory. Standard solutions fluctuate in the range of 50-100 cm.
The following types are used in the greatest demand:
- automated and manual water rollers;
- mechanized and requiring personal efforts sand fixtures;
- rollers with spikes for soil aeration.
Buy rink or do it yourself?
Given the fact that the equipment of this type of factory assembly differs high costs, for the improvement of a small or medium-sized site with an optimal solution will be the homemade roller for the lawn. For the territories of the impressive area, it is still necessary to choose a suitable model from the manufacturer.
Important! Browse the video in which the principle of operation and devices of a fully automated lawn roller from the manufacturer are clearly shown.
Creating a rink with your own hands
Before making a rink for the lawn with your own hands, select the appropriate device of the device and the option of its creation. 
Method 1
This option is the easiest, but at the same time is not effective enough and will require a lot of physical effort in the process of processing the site. To create a simple seal, take a log, but appropriate to the following criteria:
- high density of wood;
- length up to 1 meter;
- large diameter.
Important! Only in the case when the tool meets the requirements, it will be possible to achieve acceptable results. Regular use of such a device is not very desirable and at the same time not quite convenient.
Method 2.
Another technology for creating a rink roller for a lawn is beneficially distinguishes which the absence of any financial costs and simplicity of creation. 
Perform work as follows:
- Prepare 2 plastic bottles whose volume is at least 20 liters.
- Cut the bottom of each bottle.
- Connect both parts of the future rink, on the bottom of the bottom.
- Push the sand and stones inside the tank.
Important! The second material will allow the right weight of the product.
- Secure the rope on each neck.
- Fake a handle.
Important! View the video in which the principle of operation of a rink of this type is clearly shown.
Method 3.
Creating a skating rink in this way will be a rational solution in the presence of metal waste after the main construction. 
Progress:
- Take a steel or asbestos-cement pipe up to 1 meter of a wide cross section.
- Insert the other metal product of this type of similar length, but of a smaller cross section.
- Prepare concrete or cement mortar in a small amount.
- Fill the inner space of the homemade rink.
- Wait for the complete pouring of the solution.
- Fake a handle from any available durable material, such as iron or dense wood.
Conclusion
In order for the use of a self-made rink to become truly advantageous and simplified the implementation of all the work on the care of the lawn, be sure to hold some rules for its use, otherwise the result will be directly opposed and will have to restore damaged soil and vegetation for a long time. Be sure to consider the following nuances:
- Alignment of large irregularities initially follow using forks, shovels or rakes.
- Seal and smoking the soil in early spring only in the case when the soil is humid enough, and the grass itself has already dried.
- Delete stones and rubbish in a timely manner, so as not to create additional obstacles when processing the surface of the roller and not disturb the aesthetic attractiveness of the lawn.
