Each room has its own purpose, which is why special demands are presented to finishing building materials.

The ceiling in the bathroom is a design that should have not only an external aesthetic appearance, but also have good performance qualities. The basic criterion for choosing such a product is an increased resistance to water and a pair, as well as environmental friendliness.

Ceiling for the bathroom

The ceiling wrap for the bathroom, the price of which depends on the manufacturer, is simply created for rooms with high humidity. It is reliably protected from the formation of fungus, corrosion and prevents the occurrence of mold. The finished design is not deformed, not loosened, and it's easy to care for it. At the same time, a wide variety of color palette and textures makes it possible to embody the most exquisite design fantasies.

Types of cutting ceilings depending on the attachment

1. Reiki, having inserts (similar to open ceilings, but aluminum strips are located in the gaps between the panels).
2. Closed rails (fixed closely).
3. Open slats (have clearances up to 1.5 cm wide, which are decorated with profile).

Ceiling Suspension System

1. Universal carrier tire (LMBO Zhanorger, comb, traverse).
2. Rake rakes are attached to it using it.
3. A rod is fixed to the surface of the ceiling, and the bus is a bracket.
4. Corner profile that closes joints.

Wood ceiling for bathroom: reviews

The advantages of the rush ceilings for the bathroom

1. The gaps between the rails provide good ventilation over the ceiling.
2. The material from which the panel is manufactured is not affected by moisture.
3. The finished design visually increases the space due to the mirror glitter.
4. Perfectly masks construction defects, communication equipment, ventilation and wiring.
5. The cutting ceiling for the bathroom is easy and quick.
6. It is resistant to various deformations and loosening.
7. Does not involve special care.
8. It has high environmental and hygienic qualities.
9. Modern design allows you to use new interesting technologies.
10. You can apply in all types of rooms.
11. Fireproof and durable.
12. Functional.
13. Corresponds to the ratio of price-quality.

Disadvantages of French Rush Ceilings for Bathroom

1. High cost in contrast to plastic.
2. A little clusters the space and the height of the room.

Ceiling Rules for the Ceiling Bathroom

1. It is much more profitable to install this type of product in a spacious room.
2. It is necessary to buy in advance the lamps that are installed with the ceiling.
3. The quality ceiling is purchased only in a protective film.

Installation of the Ceiling: Features

Ceiling for the bathroom: Dimensions

Creasing the installation of the rush ceiling, you should know that the material is different in length and width. So there are rakes whose width has 20, 15, 10 and 9 cm. In length, they are divided into three-, four-meter, etc. If you started repairs in a regular apartment, you can use 10 cm wide panels.

Rack ceiling: installation

The system of fixing the cutting ceiling for the bathroom, the calculation of which must be made in advance, similar to the mounting ceiling from the tile. The difference is only that the tires perpendicular to the rakes are adjusted to the height and mounted on the suspensions.

Since the design grows space, it is important to be able to donate at least 5-10 cm. However, there is an option in which it is possible to install such a product without suspensions. In this case, the traverses are attached to the ceiling with a dowel with a pitch of 40-60 cm.

If the surface is small, it is quite possible to do without them. Then the rails are fixed to the willed corners.

Installation of the cutting ceiling for the bathroom

Progress:

1. Measure the tape measure in the upper corner of the room for mounting panels, make marks.

2. Measure the length of the wall and cut off the profile.

3. Drills in the opening profile using a drill with a step of 60 cm. At the same time, 5 cm should be retreat from the end of the plinth.

4. We lean the profile to the wall and marks, put in the openings of the point.

5. Drills holes and insert a dowel.

6. Fix the profile on the self-tapping screw.

7. We perform the same action with other walls.

8. With the use of roulette, we mark the plots of tire mounting. At the same time, the first label should be 30-40 cm from the wall, and the second and subsequent - 0.9-1 m parallel to each other.

9. We measure the length of the tire, the rest cut off with scissors.

10. Apply the tire to the ceiling, we note with a marker several holes at a distance of 30 cm.

11. We repeat this action with other tires.

12. Drill a hole hole at points and insert a dowel.

13. Fix the tire on the ceiling.

14. Measure the length of the panels. It should be equal to the distance between the walls per minus 5 mm.

15. We put them on the profile diagonally, snatch and straighten using tire locks.

16. Next to the first rail, we mount the second, then the third, which is located in the other end of the ceiling.

17. Install the remaining panels.

18. Regarding the need to put the lamps that are fixed in the holes created using a special annular saw.

Ceiling Ceiling for Bath: Video