The rounded log is polished on the special equipment building materials, which has a profile installed throughout the entire length. In this case, the log profile may have a different form depending on the destination. During operation, this type of well-treated wood provides unique decorative qualities, excellent thermal insulation and environmental friendliness.

Today we will talk about the grinding of the rounded log, as a reliable method of color recovery, as well as the rid of wood from the layer affected by fungi.

Advantages of grinding a rounded log

Since during the construction of a wooden house, the environment may affect the change in the natural color of the material, then grinding allows you to restore natural color and remove the remains of the len. With it, there is a mechanical surface treatment and further impregnation of wood with antiprens and antiseptics.

Thus, the main integrity of the grinding of the rounded log are the following:

• improving the operational characteristics of the building materials;
• improvement of aesthetic indicators;
• improving the service life of the construction;
• uniform applying and more high-quality secondary wood treatment with protective equipment.

Recommendations for the processing of a circular log:

• should not be grinding before starting construction;
• it is not recommended to grind the log immediately after the building was commissioned;
• this action is necessary only after a complete shrinkage of the house (about 1.5 years);
• grind your logs immediately before the painting facility.

Grinding cut from a rounded log

Such an action as the grinding of the log is the process that most often enters the complex of works on the decoration of structures of wood. It is not considered mandatory, however, it can be done throughout the perimeter or exclusively on the internal and external walls.

As mentioned above, the grinding should be started 12-18 months after the completion of construction work. It is created before the start of processing walls with special protective compositions and their coloring. This is due to the fact that the unprocessed building material is very little time remains smooth - the tree of wood gradually rises under the influence of the environment.

Grinding the constructions of a rounded log can be created manually or using a specially intended tool - a drill. Some are carried out using mechanized devices, however, with this method it is impossible to control the thickness of the removable layer, so it is recommended to be used when finishing structures from a planed or bored log.

In the process of grinding from the surface of the tree is removed by a layer of about 0.1 cm. This procedure is carried out so as not to damage the structure of the log fibers. If the grinding was done professionally, the material acquires a light shade, becomes smooth, and the drawing begins to more clearly manifest.

Grinding technology

1. Preparation of building materials.

Before starting wooden construction, it is necessary to prepare building materials for work, namely to get rid of the bark (Okrod). It is best to do this in the first 2-3 weeks after Ipened.

Okuring methods:

• using a drill;
• with the help of electruruck;
• using special automatic machines;
• cleaning with a jet of water, which enters the material under pressure from 280-350 atmospheres.

If you do this yourself, we recommend choosing the first 2 methods.

2. Grinding a rounded log.

Tools and equipment that will be needed:

• be sure to purchase the respirator;
• if you enjoy the power tools, then take different nozzles;
• also, 2 types of sandbreaks with grain size of 12.5 cm 10 cm and fraction 40 (the second type of emitting will be used for finishing cleaning, and the first - for coarse, i.e. initial);
• small machine Makita Ga 4530;

• the machine grinding Makita BO5031.

Since rough cleaning is accompanied by a raising of woodpit, it is for this reason that it is necessary to produce final stripping by the sandpaper by a fraction of 10 cm. Next, grinding of the joints of the joints, which are present between the crowns and part of the church. For this, experts have not yet come up with the perfect tool, so you will have to use the "Dedovsky" method - we remove the wooded top layer personally.

3. Upon completion of the work, it should be processed by building materials with a special protective composition.

Recommendations:

• grinding must be created to the secondary cacopa of a wooden house;
• when processing hard-to-reach areas, manual grinding is used;
• if more than seven days have passed between the processing of the walls and the application of anti-grab solutions, then it is necessary to re-make a grinding of a wooden coating, because pests could already settle in it.

Thus, the grinding of the rounded log requires not only the diligence, but also accuracy, the sequence of performing all actions, since the operational term of your home will depend on the quality of the material processing material.

Grinding video log video: