One of the most important nuances of caring for the green area on their own plot - organizing proper watering. The main requirements in this respect - the timeliness and correct dosage. Hand watering of today is no longer relevant, increasingly land owners prefer automated systems, in particular the capillary. This situation is absolutely not accidental, because it is this system distinguishes simplicity of design and a range of benefits in use.

Why capillary watering - best solution irrigation area?

To understand why it is necessary to give preference to the drip irrigation system in the country, check the list of the main advantages of this solution:

1. Timely watering each plant.
2. Proper distribution of the liquid volume.
3. Quality moisturizing greenery.
4. Easy installation.
5. The ease of operation of the process.
6. Excluded expenditure of water.
7. Feeding is carried out directly to the root system without contact with the stems and foliage.
8. Possibility of supplying solutions of fertilizers with irrigation of the soil simultaneously.
9. When using capillary watering the soil in the planting areas are not washed out.

Important! We should also mention an affordable cost of such irrigation equipment, which eliminates excessive financial costs for site maintenance.

Set the finished device or make your own hands?

Modern manufacturers of equipment for garden care and garden products supplied to the market a broad enough line. The cost of this equipment features a large spread of prices, which are determined by a number of criteria:

• size of the system;
• functionality;
• level of automation;
• brand;
• the warranty period.

However, making your irrigation system is not difficult. Therefore, before you decide to buy a ready-made irrigation systems or to design their own from handy materials, consider the following factors:

• financial opportunities;
• the amount of free time;
• level design skills;
• the availability of work skills with construction tools and materials of different types.

Features mounting kit from the manufacturer

This procedure is very simple. The main condition - choose the right set of parameters which will fully meet the specified requirements with regard to the intended irrigation area, irrigation intensity, free time on system maintenance.

How to choose the right set?

When buying irrigation systems, use the following criteria:

• manufacturer's reputation;
• quality equipment parts;
• power of the pumping system;
• quality pipes;
• convenience of remote control operation.
  

  Important! Be sure to check that the settings of all parts and their number with those set by the manufacturer. Bear in mind that how quality made all the elements of the system depends on the simplicity of the device assembly and the duration of its trouble-free use.

What to pay attention to the design of the irrigation line?

In order to correctly plan the installation of the capillary system and prevent non-rational overpowering of materials, and accordingly, the cash costs for their acquisition, follow these works before purchasing the device:

1. Create a diagram of the entire site.
2. Accurately measure the size of the entire line of watering, given the features of the location of plants and their types.
3. Plan the length of the wiring of irrigation equipment in the most practical way, but at the same time eliminate the tension of the hoses or the skipping of any plant.
4. Pre-select the principle of water supply and the location of the source.

Tools required for mounting capillary watering system

To perform self-installing irrigation equipment, you will need a minimum set of tools:

1. Ready set of irrigation equipment.
2. Polyethylene pipes.
3. Tool for trimming pipes to the desired size.
4. Drill or other tool for drilling holes.
5. Roulette.
6. Marker for layout of holes.
7. Scissors.

Important! Browse the video overview of the capillary watering system and the principle of connecting parts to more clearly present the amount of upcoming work.

How to assemble a drip irrigation system yourself?

Perform the design assembly as follows:

1. Check out the manufacturer of the watering system manufacturer.
2. Group all the details on their intended purpose.
3. Install the water supply tank or prepare the location of the stationary water supply to the connection.
4. At a short distance from the source, place the cleaning device to provide a stream of clean water for watering without unnecessary chemical impurities.
5. Route a trunk water supply.
6. Connect it to the filter.
7. Make the hose connection marker to continue the moisture supply line to beds or individual trees.
8. Drill holes.
9. Insert the seals from the kit.
10. Connect the start connectors through seals.
11. Check the tightness of the connections.
12. Connect the hoses.
13. Clean the free end of the hoses. Close the stovers.
14. Check the stream intensity when the water is supplied by adjusting the position of the cranes.
15. Pick up the correct operation mode of the system, focusing on the required dose for each plant.

How to make an irrigation capillary system with your own hands?

The design process is no different from planning the installation of the finished kit. The principle of assembling construction is similar. The main difference is only in the independent choice of all components.

What use materials and tools?

In this regard, there are quite a lot of variations of the device of the irrigation system. It all depends on the fantasy and the skills of the construction work of this direction. The easiest way to organize drip irrigation is proposed in the instructions below. To implement such a job, prepare materials from this list:

• an ordinary garden hose, with a diameter of no more than 1.5 cm, the length of the equal length of the line designed;
• droppers;
• filtration device;
• water tank, if the connection to the centralized water supply network is not possible;
• hole puncher;
• comfortable in the use of valves and cranes.

Features of the installation of the drip system from hand-drawn materials

Check out the recommendations on the installation of the capillary watering system. When this method is selected, the irrigation system is required, be sure to follow the work in accordance with the scheduled schedule:

1. Cut the hose on segments in such a way that it is convenient to lay them into beds and individual plants.
2. Spread the entire line.
3. Crerate separate parts by fittings.
   

   Important! To perform this work as quickly as possible and easily, use compression-type products. Their use will not require the use of additional materials and tools - just insert both parts of the line on both sides, the special mechanism inside the fitting will prevent them from returning.

4. Through equal intervals, set the cranes to change the frequency and intensity of watering for each group of plants as needed.
5. Mark on each segment of the hose with a marker of the holes of the holes for watering each plant.
6. Cut the droplet systems to the desired length.
7. Make holes hole in the outlined places.
8. Immediately after the puncture in each hole insert a dropper.
9. The second end of each hose segment is muted to ensure the circulation of water inside the system, but at the same time not to allow it to leak.
10. When connecting to a centralized water supply network, connect the decorated system with the feed scene to the irrigation device.
11. Install the crane at the junction to be able to independently adjust the irrigation intensity.
12. In the case of a choice as a source of special capacity, install it on a predetermined support, the height of which should be at least 1 meter.
13. Connect the water container with the rest of the watering system.
14. Turn on the water and check the stability of the irrigation system.
15. Carefully check the absence of leaks to prevent emergency situations or water recalculation.

Video

Review the video instruction of another embodiment of the capillary watering system, if you decide to prefer with plastic pipes as the main material for laying the line.

Conclusion

With the arrangement of the watering system in its own area, not only the quality of the materials used and the correct design of the line is important. No less important is the observance of all installation rules. Therefore, carefully and carefully do all the work, regardless of the type of system being installed, in order to ensure the ease of subsequent operation and prevent the need to perform regular repair work due to frequently arising failures.