The bathroom is a place where every person comes out several times during the day. From this room begins and ends day. In the bathroom, a person puts himself in order: in the morning awakened under the invigorating shower, and in the evening - sheeps off all the "charms" of the working day. I want this place to be neat and clean, so in this room you will also have to be cleanliness and order, and launder and maintain not only plumbing, but also a tile.

How to put a tile in order? Over time, pollution accumulates on it, there are drums and a lime bloom appears. To laundel from the contamination of the tile in the bathroom, you have to spend your precious output. And the result will not always be successful.

How to wash the tile

The tile is beautiful and durable, but even this finishing material will not be able to endure daily contact with water and high humidity. Over time, it is possible to see not only spots and pollution, but even a limetones and fungus. With all this, it is necessary to face every mistress and each has its own ways to guide clean in the bathroom.

What you need to prepare from the remedies:

• a pair of rubber gloves will be needed;
• brush;
• a set of pure rags or old, but a clean cotton T-shirt (and can and a terry towel);
• several washcloths or sponges for washing dishes;
• cleanser: food soda, lemon, citric acid, ammonia, vinegar, special means for cleaning tiles to choose from;
• empty bottle with pulverizer.

All means are good - the manufacturers of chemical preparations for cleaning the tile and plumbing are considered. But sometimes there are not enough time to go shopping, there is no extra fundamental or desire to breathe chemicals. But when there is a pack of food soda at hand and a bubble of the ammonia, you can try out the old grandmother's method and quickly bring the tile in the bathroom to the appropriate look.

Folk detergents tile:

1. We begin with food soda - a safe powder, not toxic, is used to prepare baking, as well as in the household. Just soda and come in handy for cleansing the tile in the bathroom. Prepare washcloth and soda. Soda powder must be poured on a washcloth moistened in water, and then wipe tile. Soda perfectly removes all pollution. Just keep in mind that too vigorously rub the surface is not worth it, because even the smallest particles of soda can damage the tile.
2. If the soda does not like, the chlorine is suitable. These means used our grandmothers when washing sink and toilet, and also added to a bucket with water when the floors werehed. Chlorine well cleans not only pollution, but also disinfect. The remedy needs to be dissolved in a small amount of water, fill the liquid into a bottle with a sprayer. Sprinkle the remedy on the surface of the tile, wait a few minutes, and then you can make beauty. Work in gloves to not harm tender skin. The method is effective, only chloride smells unpleasantly and not everyone likes this caustic smell.
3. And one more tool that is available in every home is an ordinary table vinegar. He perfectly copes with any pollution, and will also help get rid of the dried cement mortar flows (if recently in the bathroom was a repair). Vinegar can be taken a table, it is more efficient than apple. The proportions of the ratio of water and vinegar: on the water bucket - 50-75 ml of vinegar. Water should be taken hot, apply a solution on the tile with a foam sponge, and then wipe the rigid brush. Special attention should be paid to the seams to effectively remove dirt from all recesses.
4. Summer alcohol is a corporal wand in a household. You need to use very carefully, because this agent has a very sharp and repulsive odor. It is necessary to work only in rubber gloves and very carefully, so that the ammonia does not hit the skin. The ammonia alcohol is divorced in water - 2 liters should be taken on 2 liters. Alcohol. Pour the solution into a bottle with a sprayer and can be processed to work. Spray the remedy for a polluted area - wait just a few seconds, wipe the divorces. After completion, it is necessary to thoroughly wipe the tile with a cloth moistened in conventional warm water to wash off the remnants of dirt. If necessary, it is necessary to allocate more time to highly contaminated areas: apply a cleaning agent, wait 3 minutes.

How to wash ceramic tiles

Tools for removing contaminants from tiles We looked at, now you need to dwell on the best thing to wash the tile to not damage the surface. Although the tile and durable, but if the surface is glossing with a beautiful glitter, then such a tile is undesirable to rub hard washcloths and brushes. Scratch with primary processing with a brush with a rigid bristle you will not see, but the shine will disappear immediately. After some time, new pollution will appear in the scratches, which will already be removed much more difficult. Therefore, in order to effectively clean the tile in the bathroom, you need to use a soft foam sponge or a special cloth. The sponge will make it easy to handle a large plot at once and quickly get rid of pollution.

An excellent option is to purchase a melamine sponge, it will become your reliable assistant in any work.

If the desire to clean the cleanliness in the bathroom appeared spontaneously and you did not have time to prepare, then use the old washcloth, with sponges for washing dishes or highlight the old T-shirt for these purposes. Knitted cotton fabric absorbs moisture well and allows you to effectively remove contamination.

Instructions for washing tiles do it yourself:

1. In any case, preliminary preparation is important, namely: they will need sponges or special rags, be sure to dry and clean rag, well absorbing moisture and not leaving the villi. As well as: cleaning agent and rubber gloves.
2. Depending on the selected tool, apply cleaning tile on the surface. If this is a liquid of its own preparation, then it must be pouring into a bottle with a sprayer, spray on the tile.
3. Then we give time to dissolve contaminants. If you use shopping chemicals, then carefully read the instructions on the package.
4. Sometimes it has to be additionally sauing a sponge in solution to get rid of heavily polluted areas on the tile.
5. After the tile is processed, you need to wipe each tile with a washcloth moistened in ordinary water to wash off the remnants of the detergent.
6. The last stage - you need to wipe the clean tile with a cloth, which absorbs water well and does not leave the villion and traces. Perfect special rags for cleaning (bamboo, microfiber towels). You can also prepare for these purposes an old towel or T-shirt.
7. Be sure to wash the tile from the bottom, gradually moving upwards, and the final stage - the tile rubs to the brilliance from top to bottom.
8. To whiten the seams between the tiles, they can additionally wipe with a cloth moistened with hydrogen peroxide solution. Flush liquid no need.
9. If the tile is matte, then it is enough to walk along the tile at the final stage of cleaning with a dry cloth. If you have a glossy tile, you can handle the surface with vinegar, and the polished tile is necessarily rubbed after cleaning with a special mastic selected in tone tile.

Chemical compounds for washing tiles. Photo:

What can not do when washing tiles

Tile in the bathroom at least withstands high temperature differences and increased humidity, but still requires careful circulation.

Observe these rules and then your bathroom will always shine cleanliness:

• if the tile with a glossy surface, then the brush is damaged to the pollution;
• also, it is impossible to use powders, because small particles scratch the coating;
• cleaning products for sink and toilet bowl are not suitable, use special means intended for cleaning tiles.

Tips from Washing Specialists Tile

Folk methods are good, but they do not always provide due results. How to be if a lot of time and effort is spent, and the result does not suit? In some places in the bathroom, there remained ugly divorces on the tile, which does not "take" neither soda nor vinegar nor hydrogen peroxide. How to be in such cases?

It is necessary to listen to the advice of experienced specialists who will prompt how quickly and simply wash the tile in the bathroom:

1. We choose a suitable means for washing the tiles: soda, vinegar, acetic acid, "whiteness", etc.
2. Before proceeding with the cleaning of the tile, close the door to the bathroom, turn on the hot water for 2-3 minutes. Hot steam will fill the entire room, the tile warm up and the walls will quickly moisturize. Tile you will be cleaned faster and easier.
3. If aggressive drugs have chosen, do not forget that some rubber gloves are not enough, you need to protect your hair, eyes and clothing. Therefore, you will have to buy a rubber apron in advance, a mask, safety glasses.
4. The tile washing means is applied to a small area. If you apply the detergent immediately on the entire tile, then while you reach the extreme upper angle - the tile will be dry and you will have to increase the consumption of detergent. In addition, dried tool to wash, as practice shows, harder.
5. If you do not want to expose yourself dangers and inhale a pair of chemicals, then it is enough to buy a high-quality melamine sponge and then only warm water and a sponge will need. Nothing more!
6. First, the tiles on the walls are cleared, the final point of the purity point is cleaned - cleaning the floor laid out with a tile. First you need to fit the floor, wash it out, and then wipe it with the above-mentioned means of strongly contaminated places. The final point is the floor you need to wash clean water and wipe dry.

How to wash the tile. Video:

How to wash the tile. Remove the fungus from the seams between tiles

The most unpleasant in the bathroom is the appearance of fungus. If you just noticed the first manifestations, you can have time to get rid of dark sections between the seams without significant labor costs. It will take the usual food soda.

How to remove mold:

• pour soda into a pile or other suitable capacity;
• highlight the old toothbrush, moisten it in warm water;
• apply a little soda on the brush, spend the places where the mold accumulated;
• it is necessary to rub soda until the mold disappears;
• it will only be left to wash off a sponge traces of pollution and soda, wipe with a clean cloth.

The method is simple and not complicated, suitable for those sites on which the fungus has just started to appear.

If the mold managed to strange in the bathroom, then you will have to resort to other means of combating fungus. It will take a concentrated solution of acetic acid, will also help in this business "whiteness".

How to deal with fungus:

• prepare the container in order to pour acetic acid or chlorine-containing solution;
• be sure to put the gloves, as well as a protective mask with glasses and a respirator;
• take a sponge, moisten it in the solution, carefully walk through all the seams affected by fungus;
• wait a few minutes, the maximum is 10 minutes;
• if you see that the fungus does not give in, repeat the action again, increasing the exposure time;
• wash the wet cloth tool, rinse the seams with ordinary water;
• to secure the result, you can additionally go through the seams with a cloth moistened in Soda.

If the fungus settled in the seams finally, the surface cleaning is not suitable, you will need a serious struggle. We will have to consider seams to a cement solution or a fungus penetration thickness. So that the mold no longer appears, the specialists are recommended to impregnate the seams with a special solution against mold or pour gaps between tile by acetic acid.

It is important to withstand the pause so that the seams are dried, then you can apply a fresh layer of the grout and continue to comply with such precautions:

1. To timely air the room.
2. Take care of good ventilation.
3. 1 time in 6 months wash the tile from pollution and wipe the seams of soda.